Question about 1999 Buick Century

1 Answer

Dimmer switch only work for hibeams low beams wont stay on

Dim headlights wont come on when they are on they go out and hibeams have to be put on

Posted by on

  • Anonymous Apr 23, 2009

    I have the same problem with my 99 regal gs.. I don't know if I replace the relay will solve this problem..

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found the problem in the switch can you buy parts for the switch . Or do you have to buy the hole thing.

Posted on Feb 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

1 Answer

THE LOW BEAM WORK BUT THE HIGH BEAM DON'T DASH LIGHTS VERY DIM


YOUR DIMMER SWITCH HAS SHORTED OUT CAUSING IT TO STAY IN THE CLOSED POSITION THE DIMMER SWITCH OR ACTUTATOR IS LOCATED UNDER THE STEERING WHEEL PANEL JUST ABOVE THE BRAKE PEDAL ON THE COLUME CALL OR GET ON LINE TO AUTO ZONE AND LOG ON AND YOU CAN GET A PRICE CHECK FOR A DIMMER SWITCH ACTUATOR LISTED UNDER PARTS REPLACEMENT IN THE ELECTRICAL SECTION

Mar 27, 2014 | 2003 Cadillac CTS

1 Answer

Headlights wont work on dim, only bright


Check your head light bulbs, your truck has the dual filiment headlight bulbs one per side which does both high beam and low beam, 9007 bulbs.
If the low beam filiments are burned out only the high beam will work.
Also look into finding out if the headlight switch is gone bad.
The headlight module and or drl module maybe defective.

Jan 24, 2014 | 1996 Ford Ranger SuperCab

2 Answers

My headlights wont work


I don't believe there is a fuse. There is a circuit breaker built into the headlight switch. If you are sure the headlight switch is good, it could be a bad dimmer switch. If you have a voltmeter, with the headlight switch turned on, a larger yellow wire going from the headlight switch to the dimmer switch should be a hot wire. The dimmer switch sends power on a tan wire to the low beams, and through a light green wire to the high beam bulbs.
If your high beam indicator on the dash also doesn't work, then it is likely one of those switches. A voltmeter or test light would need to be used to find which one is bad. If you can find the connector at the steering column going to the dimmer switch, pull it apart and check for power on the yellow wire coming from the headlight switch, with the headlight switch turned on. If no power, the headlight switch is bad. If there is power there, then the dimmer switch must be bad.

Jan 21, 2014 | 1993 Oldsmobile Cutlass Ciera

2 Answers

My low beam lights sometimes stop working i still have high beam and daylight runing lights after a while they come on.2009 elantra dealer can't find problem.


when the low beams quit try switching from high to low and back and see if low beams stay on, if they do it may be the dimmer switch, if that doesn't change anything suspect the headlight switch.

Sep 02, 2009 | 2009 Hyundai Elantra

2 Answers

1993 Chevy Silverado truck headlights high beam only works no low


dimmer switch has gone bad need to change your dimmerswitch

Apr 01, 2009 | 1993 Chevrolet K1500

1 Answer

No Dim's


Skinny, I think your on the right track. Disconnect one of your low beam head lights, turn the headlights on and to low beam, you should have voltage on the "tan"wire at the headlight. If you do not, go to the dimmer switch under the steering column and check the same wire. If it still has no voltage, replace the dimmer switch.
Good luck and let me know.
Regards,

Feb 25, 2009 | 1998 Chevrolet Blazer

2 Answers

1996 ford ranger headlights not working


It's the dimmer switch in the column.

Jan 06, 2009 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Buick Century Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...