Question about 2005 Chrysler Town & Country

3 Answers

2005 Chrysler T & C power sliding door not working although there dont seem to be a electrical problem

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Where is the sensor located for the lock on 2005 Town & Country linited. The horn honks went I try to lock but the lock will not engage. I have to lock and unlock manually.

Posted on Apr 19, 2009

  • maandpaddy1 Apr 19, 2009

    I mis-understood the box to check, I was looking for a solution not giving one.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check the lock mechanism and sensor

Posted on Apr 12, 2009

  • dmnswt_27 Apr 12, 2009

    check the lock mechanism and sensor

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open the fuse box. pull out the fuse labeled IOD. wait 20 seconds, then put it back in.

Posted on Sep 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Chrysler town and country with a power door lock that doesent work


So.... You can't expect the electric solenoid to actuate a mechanism that you can't physically actuate.
Use a flat tool to remove the door trim and find the cause of the jam up. Dont use grease to lube mechanism or the dirt captured in the grease & oil will jam it up again.

Mar 03, 2015 | 2005 Chrysler Town and Country

1 Answer

Chrysler town and country electric door locks don't work


Do the windows work? Does the door lock work on either front door?

Oct 06, 2012 | 2005 Chrysler Town & Country

1 Answer

2005 chrysler town and country passenger power door


The cog belt could be missing teeth or have debris in the cogs...

Feb 15, 2010 | 2005 Chrysler Town & Country

1 Answer

My 2005 town and country touring drivers side power sliding door has completely stopped working. It started off slow and then quit completely. now my husband said that the drivers side rear window wont...


for the sliding door,check the wiring that is housed in the plastic chain at the bottom of the door.the problem with the window may be the switch in the driver door

Nov 17, 2009 | 2005 Chrysler Town & Country

1 Answer

I have a 99 montana passenger side sliding door dont work. Hit either button all it does is clicks and motor seems to be fine.. I went to junk yard bought complete new motor and everything that comes...


I would check the overhead buttons there are two one opens the door, and the other beside it that shows the van crossed out, disables the electric sliding door feature. try playing with that, Also remember, that vehicle must be in PARK for the electric sliding door to open. Make sure the power lock on that door is working, and check the child safety lock when you have it open by the doors catch. Hope that Helps You.

Aug 02, 2009 | 1999 Pontiac Montana

1 Answer

The electric door locks quit working on an 05 T&C. is there something that I can do without going to the dealer? I pulled ioc fuse several times.it only works for a short time after that


I don't know if this will help but the electric door lock (driver-side, rear, sliding door) of our '05 T&C stopped working and the mechanic (was shopped for minor wreck damage) indicated that the lock actuator was at fault and he had none in stock. It did not get replaced and, of course, still is not working - electrically.

Jun 30, 2009 | 2005 Chrysler Town & Country

1 Answer

Passenger sliding door motor won't close door all the way.


I just fixed my 2005 T&C sliding door. The wire in the plastic rolling chain is broken when resides right under the step pad. It took me 30 minutes to fix.

Go to this link.
http://wiki.answers.com/Q/How_do_you_replace_the_power_sliding_door_wiring_harness_on_a_2005_Town_and_Country_chrysler

Good luck!

May 27, 2009 | 2005 Chrysler Town & Country

1 Answer

Passenger Sliding Door


If it operates normally by the key fob and the contols in the car but slides hard manually, it probably need s a sliding door motor. There is a clutch in the motor that probably is not disengaging as it should. Surprising that a dealer could not tell you this as I am a former Chrysler technician.

Oct 15, 2008 | 2005 Chrysler Town & Country

2 Answers

2002 Chrysler T&C sliding door won't UNLOCK w/ Switch or Key FOB


the other locks work correctly.

quick fix is to clean the contacts that the door makes when you close it. there are contacts on the door pillar (probably look like little copper circles) on the door itself there will be some spring loaded contacts... make sure they work freely and are clean.

Robert

Sep 08, 2008 | 2002 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...