Question about 1999 Nissan Quest

2 Answers

2001 nissan quest brakes

I still have problem with the brakes pedal goes down to the floor I replace the master cly the calipers on the front and the pads. I bled the brakes from back to front can someone tell me what I'm doing wrong.Thanks David

Posted by on

  • Anonymous Apr 13, 2009

    Thanks after I get a scan tool tomarrow what Im I looking for in the scaner I never used it on brakes on to read codes

  • utahjazzlala Apr 13, 2009

    Thanks after I get a scan tool tomarrow what Im I looking for in the scaner I never used it on brakes only to read codes

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 76,682 Answers

You need a scan tool to hold open the control valves in the ABS, air is trapped in it and you can't bleed the brakes until you have the ABS held open

Posted on Apr 12, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Check your brake lines and look for any moist and wet areas around your brakes

Posted on Apr 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replaced 3 disc brake calipers on my 2001 pt cruiser. after bleeding all 4 brakes 3 times, I started the car and brake pedal goes to floor. is my brake booster shot?


Michael:

You must start bleeding the brakes at the wheel farthest from the master cylinder (usually the right rear), then the next farthest from the master cylinder, then the next, then the closest. If your master cylinder is at the left front of the car, start with the right rear, then the left rear, then the right front, then the left front. If you don't bleed the brakes in the correct order, you are just shifting the air in the lines from one line to another. Make sure that you close the bleeder before letting the brake pedal up, and the engine should not be running when you bleed the brakes... Make sure that the emergency brake is off. Make sure that the master cylinder does not run out of brake fluid at any time that you are bleeding the brakes.

Jan 24, 2016 | 2001 Chrysler PT Cruiser

1 Answer

Brake pedal goes to the floor


check vacumn and\or connections to the vacumn boost cannister.

Apr 21, 2010 | 1985 Ford F150

3 Answers

Brake pedal all the way to the floor...Possible abs module?


Im going to assume that a mechanic has already checked for the most simple causes like making sure the brakes have been bled. If the abs module is faulty it will default to just a no abs state, but that wont cause the pedal to go all the way to the floor. I agree that replacing the caliper is probably gonna fix the problem, but I might try to bleed the brakes first and see if that solves it first...

Jan 24, 2010 | 2001 Dodge Grand Caravan

1 Answer

I can't get brakes on my 2001 dakota ,the pedal goes right to the floor with little brakes. I've changed the master cly. and no difference. I've bled the system.there is something wrong with the front...


did you bleed the master cyl. before or during installation? bleed brakes in proper order?RR LR RF LF? does it have a power booster between master cyl.& firewall?check for vacuum to booster.when ABS isn't working you should still have brakes.suspect power booster diaphram.

Sep 21, 2009 | 2001 Dodge Dakota

2 Answers

I have a 92 chrsy. 5th ave with no antilock brakes. just base brakes with rear drums. replaced master cly. due to leaking and replaced all the brake lines and hoses. i have good streams of fluid from all 4...


When you bleed the brakes are you starting with brake furthest from the master cylinder? Also was the master cylinder bench bled? If everything there is okay and you are not getting any air in fluid stream, you could try bleeding the brakes by having some one slowly pump the pedal till it is firm. Then have them let off open first bleeder valve and slowly depress to floor and hold there untol the valve is closed. repeat this at all bleeders. You may want to have car running to do this. Try this and let me know.

Jul 02, 2009 | Chrysler New Yorker Cars & Trucks

1 Answer

Brakes are soft


must still have air in system or a bad new master cly.make sure you bleed all 4 wheels.could take awhile if you did not bench bleed the master cly first.

May 28, 2009 | 2002 Nissan Maxima

2 Answers

2001 brake pad replacement 2001 nissan quest


The hard part is pressing the caliper piston abck into the caliper so you can get the new, thicker pads over the rotor. A large C Clamp works best.

SECTION 206-03: Front Disc Brake 2001 Villager Workshop Manual
REMOVAL AND INSTALLATION Pads —Front Disc Brake Removal
  1. Remove the wheel and tire assembly. For additional information, refer to Section 204-04 .
  1. Remove the front disc brake caliper bolts. torx bit. T20?
  1. Support the front disc brake caliper from the front strut and spring assembly using mechanics wire.
  1. Remove the front disc brake pads.
    1. Remove the outboard front disc brake pad.
    1. Remove the inboard front disc brake pad.
Installation
  1. s1v~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure the master cylinder reservoir does not overfill and spill brake fluid while retracting the front disc brake caliper piston.
    NOTE: It is necessary to fully retract the front disc brake caliper piston in the bore before installing the front disc brake pads.
    Install the front disc brake pads.
    1. Install the inboard front disc brake pad.
    1. Install the outboard front disc brake pad.
Caution. The outer pads are left and right. put left on driver side.
  1. Position the front disc brake caliper on the front-wheel knuckle and install the brake caliper pin bolts.
  1. s1v~us~en~file=ani_caut.gif~gen~ref.gif WARNING: It is necessary to depress the brake pedal several times to position the front disc brake caliper piston before driving the vehicle.

Apr 23, 2009 | 2001 Nissan Quest

3 Answers

Bleed brakes but no pedal


Good! You bled the master cyl. before installation! The proper order of bleeding the lines, is to start with the wheel the greatest distance from the master cylinder. Then work your way to the next greatest distance, and last, the closest wheel. Make sure all air is removed from the lines before you proceed to the next wheel, and frequently check the master cyl. level, because, as I'm sure you know, if you **** in air at the master, you have to start all over again. I'm assuming you don't have a power bleeder, so with a helper do this with car running (make sure it's on safety stands and not going to fall on you!) Pump pedal 3 times, no need to mash the pedal into the floor, just 3 pumps 1/2 way down, hold 3rd pump at half way down level while bleeder is opened, when flow is about to stop at bleeder, close bleeder and repeat til no evidence of any air. Let me know how it goes and if you need any help.

Apr 21, 2009 | 2003 Pontiac Montana

1 Answer

2001 quest nissan brakes problems


then you either have a bad master cylinder or there is sti air in the system trapped.

go here for help

http://autos.groups.yahoo.com/group/villagerquest/

Apr 12, 2009 | 1999 Nissan Quest

Not finding what you are looking for?
1999 Nissan Quest Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...