Question about 1991 Ford Taurus

1 Answer

I need to know which pully it is that i move to get my serpentine belt off to replace it

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

There is a tension pully that is a little weel that is attached to a bolted bracket remove that and then you can remove your belt

Posted on Apr 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to know how to adjust serpentine belt, please show diagram. 6 cyl engine.


Really don't need a diagram. Loosen the slide bolts on the power steering pump. loosen or tighten the pump by turning the jack screw (long transverse bolt) under the pump. Once the belt is tightened up, lock down the slide bolts and you are finished.

Jun 17, 2010 | 1994 Jeep Grand Cherokee

1 Answer

How to repace tenison pully


first releave the tension as you normally would by using a breaker bar and socket and move the serpentine belt aside. Then you remove the center bolt on the pulley itself. Install new pulley and replace the serpentine.

Nov 13, 2009 | 2004 Lincoln Town Car

2 Answers

I need to replace my serpentine belt..how do i do


Yes you can replace it yourself. Go to the nearest autozone autoparts store that loans tools and assistance for free. Some other auto parts stores do this too so call around.

As long as you purchase the part from them they will assist you with the loan of tools and know how.

Aug 19, 2009 | 1994 Dodge Caravan

1 Answer

Serpentine Belt Alignment


you shouldnt have any allignment issues, assuming that the pully is good. if it needed to be replaced, you would know it. you would hear all kinds of odd noises...but my guess is that when the tension was put back on the belt, it was overlapping one of the edges on a pully farther down. just take a close look at where the belt is routed, and make sure that it is on its track on every pully. if not, release the tension, reallign, and tighten up again.

Aug 04, 2009 | 1997 Pontiac Grand Prix

2 Answers

Replace 2000 buick park ave serpentine belt


Firt - study & write down (draw) the belt path,,
and be sure about it..

Then - put a wrench on the nut in the center of the tension pully.. Move the tension pully to loosen the belt.. Pull belt off..

Repeat to put new one on..

Should be pretty easy..

Jul 09, 2009 | 2000 Buick Park Avenue

1 Answer

How do I release the belt tension pully to replace serpentine belt


You can run down to your local auto parts store and buy a serp belt tool. Or you can take a 3/8 drive ratchet, locate the 3/8 square hole in your tensioner and put the ratchet in the hole. For more leverage I put a deep socket over the ratchet handle and put a long 3/8 extention in the deep socket. This will provide ample leverage and will save buying more tools you do not need. Simply move the tensioner to the direction that takes pressure off of the belt.

May 24, 2009 | 2003 Chevrolet Cavalier

1 Answer

2000 isuzu rodeo removal and installation of serpentine belt


All u need to do is put a wrench on the tention pully and turn it clockwise... this will relive the tention take off the old belt ....put on new one. repeat relive pressure again ...slip it on pully... and relese tention..... done! :)

May 16, 2009 | 2000 Isuzu Rodeo

1 Answer

Load squeaking when running dies sometime


all pullys should be moving in the serpentine belt, if one is not moving than that would cause friction and belt winning. replace what ever that pully is attatched to the bearing is ceased.

Sep 25, 2008 | 1990 Ford LTD Crown Victoria

1 Answer

SERPENTINE BELT


You need to go to Autozone or where ever and rent a serpentine belt tensioner pully wrench before you do anything. then you get a diagram for your car and route the belt liek the diagram says, google image should work just fine. the tenion pully on an 03 is in the on the right as you are standing looking at the pully system. its the second one down. its the only one that moves.

Aug 02, 2008 | 2003 Ford Escort

1 Answer

Serpentine belt adjustment pully repair guide


the steps are to take the tire off remove the splash shield and there is the belt and pulley.

May 27, 2008 | 2001 Chevrolet Metro

Not finding what you are looking for?
1991 Ford Taurus Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...