Question about 1991 Oldsmobile Cutlass Supreme

1 Answer

1991 olds cutlass supreame 3.1,no power to starter

Replaced ignition sawitch,no change. have not yet replaced the neutral safety switch.Is there any other component that would keep power from the starter?
starter was replaced and started when I hot wired from battery.

Posted by on

  • Paul
    Paul May 11, 2010

    check your ignition fuse and relay?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The wires going to the starter, are fuseable links one might be broken. pull slighty if the wire streaches then the link is blown. Replace.

Posted on May 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 ford escort, 1.9L automatic. Won't turn over. no power to starter.what am I missing?


It's not uncommon for the ignition switch to go bad in those Escorts. Check power into and out of the switch and replace if no power out.

Dec 04, 2016 | Ford Cars & Trucks

1 Answer

My car only starts when i cross wire the neutral safety switch. i recently changed out the ignition and it ran for about 3 weeks now nothing! wont turn over at all not even a click (unnless i cross wire...


if your starting the car,by only jumping a wire at the neutral switch,then you more than likely have a bad neutral safety switch that needs to be replaced.

Apr 13, 2011 | 1991 Pontiac Firebird

1 Answer

What are the schematics for wirinig an ignition for a 1991 300e mercedes benz? I am not sure what wire goes where when wiring my ignition


  1. The following fuses can cause the car not to start. Check and Replace fuses B, 5 and 6 and 7.
  2. Check the power to the neutral safety switch. When the ignition switch is activated there is no power to the neutral safety switch. Power to the neutral safety switch comes from the ignition switch on the violet wire. If there is no power at the violet wire when the key turns to start, the ignition switch is probably bad or there is a problem with the wiring to the switch.
pctech1.png

Feb 17, 2011 | 1991 Mercedes-Benz 300 Diesel

1 Answer

How to check the ignition switch?


There are some fusible links mounted with the starter on the cable,check to see if they are burned into,pull on them they will pull apart like taffy.Also,check the neutral safety switch ,try in neutral ,see if it will start.Make sure the negative battery cable is good,this can cause the problem also,see if there is 12 volts on the purple wire on the starter solenoid when starting the engine,if not,check the neutral safety switch,if it is good,replace the ignition switch.

Apr 06, 2010 | 1991 Chevrolet S-10 Blazer

2 Answers

Starter has power to it but has some problem from the key to the starter Does this model have a relay or something?


Check the neutral safety switch,if it is o k,then replace the ignition switch,Not the key cylinder,but the electrical part.

Jan 23, 2010 | 1991 Oldsmobile Ninety Eight Regency

2 Answers

1990 Acura Ledgend (AT) When the key is turned to the start position nothing happens. Starter does not engage. I can jump the starter solinoid and it turns over just fine. I'v checked continuity of the...


There is a plug to go through the firewall above the passenger wheel well. You may have a bad clutch interlock switch (m/t) or neutral safety switch (a/c).

Jun 20, 2009 | 1991 Acura Legend

1 Answer

1991 olds cutlass supreame 3.1


Did you check the starter relay and make sure that all the connections to the starter are correct?

Apr 04, 2009 | 1991 Oldsmobile Cutlass Supreme

2 Answers

91 olds cutlass supreame 3.1 when runing turn ignition off.try to start immeaditely after.completely dead,sometimes after waiting appx.15 minuets it may start.replaced battery&starter no change.


Greeting's Bigcat.. Did you check all the fuses in the car as a first start..? If not you may want to as it could be one that controls the system . Ok... if you did you may want to see if you are getting power to the starter with a test lamp put the clamp on a piece of metal and hold the point to the starter cable ..have another person try to start the car , if you get power to the starter the probe should light up if and it would be the starter ...if the test lamp did not light up then it is a electrical issue in the ignition system and you will have to check all the wires in the starting circuit.

Mar 29, 2009 | 1991 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1991 Oldsmobile Cutlass Supreme Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...