Question about 2000 Mercury Cougar

1 Answer

Window switch replace on passenger side - 2000 Mercury Cougar

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You will then be able to access the harness attached to the switch. Disconnect and replace with a new switch and then reassemble

Posted on Aug 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Colorado passenger window will go up and down with drivers control switch, but not using passenger side switch. Replaced switch on passenger side with no changes...


Lockout Switch Feature
The window lockout switch, when closed, provides power to the passenger door switches enabling normal window operation and when the lockout switch is open, power is cut to the passenger door switches disabling window operation. Normal window operation is still available from the driver master control.

Jun 29, 2017 | Cars & Trucks

1 Answer

Passenger window switch works but the drivers side switch does not


was regulator bad? did it work from drivers side switch before you did regulator repair?..if so passenger side switch wiring has issue and is not sending signal through it back to the drivers side master switches.. otherwise you need to pin test for power up power down on drivers side switch and repair that if issue going to the window on passenger side.. (possible pinched at door jam area common)

Nov 20, 2013 | 2002 Hyundai Accent

1 Answer

2007 passenger side widow won't go up


Faulty switch on passenger door, take out and replace or clean with crc cleaner

Oct 09, 2012 | 2007 Nissan Altima 3.5 Sedan

1 Answer

Yesterday I had the passenger's side window motor


Disconnecting the battery will cause this. It happened on my Mazda 6 and there should be instructions in your manual.
It will be something like this:

1. Turn ignition switch to "on" position.
2. Open passenger window completely from passenger side window switch.
3. Close passenger window completely from passenger side window switch, and hold switch for an additional 2 seconds.
4. Turn ignition back to "lock" position.

May 12, 2012 | 1992 Lexus Sc 400

1 Answer

2004 Grand Am Coupe Passenger Window Problem


Yes you will have to replace switch on drivers door. That is where the problem is.

Sep 17, 2009 | 2004 Pontiac Grand Am

1 Answer

Passenger side window won't roll up using the driver's side switc


Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.

Aug 18, 2009 | 2003 Hyundai Tiburon

1 Answer

2002 Cougar passenger side window switch - remove & replace


remove the door panel switch comes off from inside

Jul 23, 2009 | 2002 Mercury Cougar

1 Answer

My 2000 Jimmy window switch on the drivers side does not work for the passenger and driver side windows? What should I do or replace?


if the drivers side switch is the only one that doesnt work it needs replaced confirm by making sure the passenger door switch works the passenger window

Jun 21, 2009 | 2000 GMC Jimmy

2 Answers

Passenger Window Stuck all the way Down


Try switching the power window switch from the passenger side to the drivers side. Before you do that try with the switch on the up position, wiggle it from side to side. The contacts may be worn and by wiggling it may make contact. Other then that try to park it in side or garbage bag taped to keep rain out till you get it to the shop.
Hint, take it to a Auto window repair shop to replace the switch if it's bad or if the motor is bad. They have more experience to removing the door panels and removing the power window regulator (motor) if that needs to be replaced.
Good luck and hope this helps. 

May 30, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
2000 Mercury Cougar Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...