Question about 2004 Hyundai Tiburon

1 Answer

Pulled off front head lights to clean moisture out?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Those headlamp assemblies cannot be taken apart or cleaned out inside. You can use a hair dryer and dry them out that way (remove bulbs first) The seals arround the assembly are leaking allowing water/moisture to get inside. The proper fix is to replace the assemblies (very expensive). I suppose you want to try to fix them yourself. You might be able to if you can find 'where' the seal(s) are weak/leaking (or if the assembly is cracked somewhere). Once you do, you could use silicon sealant or RTV and see if that works.

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My hose busted and blew coolant all over engine now engine light stays on and it runs little rough at first any ideas.


most common is coolant has saturated the plug wires and misfiring at start up causes spark plugs to arc to a ground

Mar 08, 2015 | 2004 Dodge Durango

1 Answer

I have a 2003 windstar . all at once as I started


what does ford dealer say about the issue? call the service guy, if he sez" bring it in", do not bother. pull off both the + and - battery cables. Let stand for a few minutes, clean the battery posts while u wait. clean inside of cable connections. put a lil Vaseline on the battery posts. then reconnect. if no-start condition still exists, hav car scanned. advanced auto will scan for free?! lol.

Oct 23, 2013 | 2003 Ford Windstar

1 Answer

Condenseation in head light lens 2006 eqyinox


try to reseal lamps or get new ones is really all you can do to fix.

Aug 01, 2012 | 2006 Chevrolet Equinox LS

1 Answer

White smoke appears after i changed the valvecover gasket thermostat and radiator


bad news most likely its a head gasket , white smoke {moisture} black smoke [fuel or oil] - pull dipstick clean [ make sure engine is cool] look for over full on dipstick,look for moisture on dipstick, smell it to see if you smell gas odor

Sep 12, 2011 | 1993 Ford Escort 4 Door

1 Answer

Headlights have moisture on the inside. How do I remove the lens to clean and replace the gasket.


There are 3 pull tabs on each light housing. lift up and remove all 3 and simply pull out the complete assembly very easy.----------
Once the assembly is out, you can clean the lens from inside to get rid of moisture.--------
For more detail, click the link below:--- http://howtobyme.blogspot.com/2011/07/how-to-remove-headlight-on-1999-lincoln.html ----------- This will help.Thanks.Helpmech.

Jul 21, 2011 | 1999 Lincoln Town Car

1 Answer

2003 explorer whit 4.0 lt have oil in radiator and coolant in oil pressuretested oil cooler has good compression runs good dos not overheat no misfire


sounds like a blown head gasket. Pull plugs and see if a couple are very clean due to moisture burning in cylinder.

Dec 27, 2010 | 2003 Ford Explorer

1 Answer

Volvo v7 2003 keeps blowing side light bulbs at the front especially the drivers front


Are they the correct bulbs? Correct fuse? Are the contacts clean and no moisture going to them? It is good to use the lithium grease that the factory uses which prevents moisture in the contacts which will short and burn out bulbs and can lead to shorting out the entire circuit.

Jan 26, 2010 | 2003 Volvo V70

2 Answers

Lights go off and on driving down the road and voltmeter jumps down and up alternator tested good


Check the wiring to the headlights first and check the wiring connections to the light switch as well as to ensure the battery terminals are clean tight and tight to the alternator to start with.

Nov 05, 2009 | 1993 GMC Sierra K1500

1 Answer

How to replace a front light bulb on 2001 stratus


REACH BEHIND HEAD LIGHT ASSEMBLY.ROTATE THE SEALING COVER COUNTERCLOCKWISE TO REMOVE IT FROM THE HEAD LIGHT HOUSING.REMOVE THE BULB LOCKING SPRING. DISCONNECT THE BULB ELECTRICAL CONNECTOR.PULL STRAIGHT OUT ON THE BULB TO REMOVE IT.BY BULBS BEING HALOGEN.DONT TOUCH WITH BARE HANDS. OIL FROM HANDS WILL CAUSE BULB TO BLOW BY OVERHEATING.HANDLE BULBS WITH CLEAN GLOVES OR NEW CLOTH GLOVES.

Oct 31, 2009 | 2002 Dodge Stratus

1 Answer

Replace ford escape turn signal front 2005


you should not have t remove the headlight assembly to replace the bulb access should be under the hood. as for the moisture the bulb holder may be damaged or not fitted properly

Oct 16, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...