At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Buy a new emergency flasher ,Dealer item only .$22 That is what my problem was.Change it by taking the black ring off the speedogauge clusters.place a socket over the haz.flasher and hit inthru the dash unhook wires,change Buy a new emergency flasher ,Dealer item only .$22 That is what my problem was.Change it by taking the black ring off the speedogauge clusters.place a socket over the haz.flasher and hit inthru the dash unhook wires,change
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Drivers side of steering column under dash, check flasher make sure its tite, turn key to on, turn signal on, move flasher round see if turn signal starts working replace flasher try it agian might be bad connection
Click on the link.
This is for turn signals. Get at the turn signal switch. See the purple wire, L terminal on top of turn signal switch in diagram, that should go hot with key on, use jumper wire from that terminal to one of the wires on bottom of turn signal switch in diagram, those are, front/rear, left/right turn signals. If the turns signals work properly with the jumper, but, other wise don't, the problem should be the turn signal switch. If it still doesn't work properly, you would have to check wiring circuits.
Sometimes a faulty ground can cause weird problems. Sometimes the bulb doesn't make good contact in the bulb socket? Try putting a little pressure on the bulb in the bulb socket, see if it starts working?
You more likely have a bulb that is no good. The next time your signals aren't working, pull over and check to see which bulb isn't working. Make sure the turn signal is on while checking. It should only be the left or right. Not both. Sometimes you can see the blown bulb with the hazards on depending on your model vehicle. Simply check the bulb thats not blinking for a tight fit. Then replace it if thats not the cure.
Sounds like you have a short in the turn signal switch ( in the steering column). Depending on the different functions of this switch will determine the cost. If you have one that simply works the turn signals, then your looking at about $15. I believe yours should cost around $75 since it's a multifunction type. Installation time is about 20 minutes
Buy a new emergency flasher ,Dealer item only .$22 That is what my problem was.Change it by taking the black ring off the speedogauge clusters.place a socket over the haz.flasher and hit inthru the dash unhook wires,change
×