Question about Buick Park Avenue

1 Answer

Hello i touch neg. and positive wire on driver blinker on my buick park avenue ultra 2000 and it blew a fuse the hazard one not the signal so not me knowing the neg. wire and positve wire was touching i added a stronger fuse now the driver side wont blink at all

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 743 Answers

If the lights are coming on, but they won't blink, it could be the turn flasher relay.

Posted on Oct 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

1 Answer

Right blinker not working 1999 Buick park avenue


You'll need to find a wiring diagram an component location chart to check this out . Here is a diagnostic flow chart for trouble shooting this problem ! Do you know how to use a voltmeter ?
DEFINITION: This table diagnoses inoperative turn signals on one side. It assumes that the cornering lamps, hazard lamps, and turn signals on the other side all operate properly.

1

Did you perform the Exterior Lights System Check?
--
Go to Step 2 - yes
Go to Exterior Lights System Check - no

2

  1. Disconnect the turn signal flasher connector.
  2. Turn the ignition switch to the RUN position.
  3. Place the turn signal switch in the appropriate position.
  4. Connect a DMM from the appropriate turn signal flasher connector cavity to ground:
?€¢
LH: cavity C (ORN)


?€¢
RH: cavity B (BLK)

Is the voltage within the specified range?
10-15 V
Go to Step 3 yes
Go to Step 5 no

3

Connect a fused jumper between the appropriate turn signal flasher connector cavities:
?€¢
LH: cavity C (ORN) to cavity D (YEL)


?€¢
RH: cavity B (BLK) to cavity F (TAN)

Do the appropriate turn lamps light without flashing?
--
Go to Step 4 yes
Go to Step 6 no

4

Replace the turn signal flasher. Refer to Hazard and Turn Signal Flasher Replacement .
Is the repair complete?
--
Go to Exterior Lights System Check
--

5

Repair the open in the appropriate circuit:
?€¢
LH: CKT 57 (ORN) between S200 and the turn signal flasher


?€¢
RH: CKT 58 (BLK) between S201 and the turn signal flasher

Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Exterior Lights System Check
--

6

Repair the open in the appropriate circuit between the turn signal flasher and the IP fuse block:
?€¢
LH: CKT 685 (YEL)


?€¢
RH: CKT 686 (TAN)

Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Exterior Lights System Check

May 09, 2015 | 1999 Buick Park Avenue Ultra

1 Answer

The horn does not work on my 2000 Buick Park Avenue Ultra. What are the most likely causes and how can I fix them?


Bad Horn
Bad Horn Button
Bad Clock Spring
Wire fell off horn
Fuse for that & other circuits

Mar 07, 2013 | 2000 Buick Park Avenue

2 Answers

Where is Flasher


1994 Buick Park Avenue 3.8L SFI OHV 6cyl
The Flaser is located in front seating area, driver side, under dash, driver side of steering column, mounted in lower corner of fuse block.

Application:
01 for Hazard flasher; and,
01 for Turn Signal Flasher.

Good luck (remember rated this help).

Jan 13, 2010 | 1994 Buick Park Avenue

2 Answers

Turn signals wont flash on a 94 buick park avenue ultra unless you do it manually and i put a new flasher in already still wont flash


you may have replaced the wrong flasher, some vehicles have separate flasher for the turn signals and the emergency flashers

Sep 16, 2009 | 1994 Buick Park Avenue

1 Answer

Buick park avenue 1995 blinker/brake/dash lights


I have a 98 Bucik Park Avenue. I recently had it painted and when the body man put the lights back in I began having problems with the brake lights and turn signal lights. Only one brake light lights up and only on signal light lightsup and they are on opposite sides. I have changed the bulbs (all) and I have tested the fuses(All).

Aug 04, 2009 | 1995 Buick Park Avenue

1 Answer

99 park avenue turn right side turn signals inop does it have a relay and were is it located


If the left side still works, its not the blinker relay, the thing you hear ticking. Both left and right signals go through the same signal stat. Turn on your hazard flashers and make sure the bulbs on both the left and right side come on. If the do, you may have a problem with the turn signal switch on the steering column itself. If only the left comes on, it could be bad bulbs on the right side or a wiring issue. Wiring issues are more rare on Park Aves.

Jul 09, 2009 | 2000 Buick Park Avenue

1 Answer

Turn signal flasher


there are 2 one for the hazards and one for the blinkers

the hazards are under the dash about where your right knee would be you have to remaove the lower portion of the dash (2 screws)

the blinkers are way up under the dash by the parking brake.....way up you have to get on your back and move wires to see it if the flasher still works a little you can hear it.....again its way up there but you dont have to remove anything to get to it.

I just changed mine it took 10 times as long to find it as it did to replace it

Aug 25, 2008 | 1993 Buick Park Avenue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...