Question about 2006 Chrysler Sebring

1 Answer

2006 chrysler sebring will not turn over

I have a 2006 chrysler sebring convertible that I had to replace the pcm. Now it will not turn over. Can someone tell me why? Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

When one of these has been changed you must have or your mechanic must have a special scan tool called a "DRB III". This "special tool" costs in the neighborhood of $8000. The car must be completely reprogrammed including the mileage. After the reprogramming has been performed, your car will need to "relearn" your driving style and may seem to under or over perform during that relearning process which lasts about 200 miles.
If you are able to obtain one of these tools, I can send the directions from the factory service manual, if you need them let me know.

Posted on Mar 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 chrysler sebring 3.0l lxi. what do this code po421 mean


DTC P0421: Warm up Catalyst Efficiency Bank 1 Below Threshold
  1. Sensor or solenoid faulty
  2. Connector terminal contact damaged/corroded
  3. Wire harness fault. Check for correct voltage, open, short to ground or short to voltage
  4. Control unit software needs updating
  5. PCM or ECM faulty
  6. HO2S sensor contaminated/damaged
  7. Exhaust leaks or restrictions
  8. Catalytic converter damage
  9. Catalytic converter operating incorrectly

May 19, 2017 | 2001 Chrysler Sebring

1 Answer

I have a 2006 chrysler sebring I just changed the camshaft and cranksensor and it still won't start it just cranks could it be the pcm ?


Chrysler Sebring no crank no start resolved - YouTube

? 1:11
www.youtube.com/watch?v=sCZqeyC5jDQ

Oct 21, 2013 - Uploaded by DanielRau1234
My car would not start. the problem turned out to be a 20 amp fuse. ... This fixed my 2006 Sebring. It's fuse ... My sons chrysler sebring 2004 has the exact same problem! .... Engine Won't Start - No Crank Diagnosis (Troubleshooting Starting System Issues) - Duration: 25:23. by Bushougoma 431,429 views.

Oct 27, 2015 | Chrysler Cars & Trucks

1 Answer

Where is the voltage regulator in a 2001 sebring convertable located and if tin the PCM where is it located


its in the alternator, the pcm is right behind the drivers headlight, its rectangular and has two large electrical connectors

Oct 12, 2014 | 2001 Chrysler Sebring

1 Answer

Replace grill on 2006 sebring convertible


take off the bumper cover and then you can see the screws that hold it on

Nov 25, 2013 | Cars & Trucks

1 Answer

Sebring 1997 I need picture to lookat the PCM sensor and the Crankshaft position sensor (CKP sensor)


On 1997 Chrysler Sebring 2.5L MFI 6cyl...
- the PCM is located in the left side of the engine compartment, beside the Power Distribution Center (PDC).

zjlimited_767.gif

Fig. 1: Location of the PCM on the Cirrus, Stratus, Sebring convertible and Breeze models

zjlimited_768.gif

Fig. 2: Location of the PCM on the Sebring coupe and Avenger models

- the Crankshaft Position Sensor is located: under hood, driver side, upper engine area, mounted on end of engine block

zjlimited_769.gif

Fig. 4: Location of the crankshaft position sensor on 2.5L engines

Hope helps; remember to rating this answer and leave some testimonial comments.

Oct 09, 2011 | 1997 Chrysler Sebring

1 Answer

I have taken all the lug nuts and the center cap off of the 2006 Chrysler Sebring convertible and i cant get the tire off....what do i do?


you have to kick the tire ,turn and kick it witrh the flat part of your foot on thfront of the tiremay take a couple of kick to free it .

Dec 25, 2010 | 2006 Chrysler Sebring

1 Answer

Need to replace blower fan


i assume you are talking about for the ac/heater
it will be under the dash on the passenger side
i would suggest buying a haynes book for this you can get them at places like autozone for around 15 bucks
its a easy task just be careful taking off the fan blade and dont brake it

May 02, 2009 | 2006 Chrysler Sebring

Not finding what you are looking for?
2006 Chrysler Sebring Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...