Question about 1994 Saturn Sl

2 Answers

Power window won't operate

1994 saturn sl2 drivers side power window stuck in down poistion.I removed inside door panel but can not get to motor.Do I need to remove outside panel too?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 743 Answers

Yep! There are two slide pins on the door handle that are very small. They need to be pushed out with a pick type devise. Be careful not to loose them since they will need to go back in the same slot...they can be pushed forward towards the front of the car, or backwards towards the back of the car. Then you will need to take the torx screws out of the inside panel. It might be a # 30 torx wrench...I not exactly sure.

Posted on Oct 04, 2009

  • Lyle D. Rowh Oct 29, 2009

    Yes, there are two plastic pins on the door handle that you will need to press out with a pick like tool...don't loose them for they are needed to go back togather. The bottom inside panels have torx screws...make sure that you use neverseize that can be purchased at AutoZone since these like to corrode and are hard to get out and in...oil won't work very long.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I tried to power lock the windows won't work what can I change?

Posted on Jan 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the radio fuse in the fuse box in my 1994 saturn SL


On my 97 SL2 it's on the passenger front side near where your left foot would go. You remove the panel as part of the center console and it's behind it

In my 1994 Saturn SL1, there is a grey one under the hood on the driver's side AND one inside the car on the passenger side where the left foot would go


On the passenger side, on the side of the instrument panel, there is another fuse box, the radio fuse is number 10 on mine. The problem is I changed it and the radio still doesn't work.
On a 93 sl2 its in the same fuse box, but is number 19



Dec 12, 2010 | 1994 Saturn Sl

2 Answers

My drivers side window on my 1994 ford Taurus is stuck in the down position. how do i get it to go up and down again? the window motor is working ok. just that the window will not move


If the motor is working but the glass is not moving something must have broke inside the door. See if you can sneak a piece of duct tape down along side the glass, get it down as far as possible. Use a butter knife or something to make the tape stick to the glass, now try pulling the glass up with the tape. You may want run the window motor at the same time maybe it will catch. If you get the window up, tape it with duct tape so you can get it to a shop to get it fixed. Good luck.

Feb 21, 2010 | 1994 Ford Taurus

2 Answers

1994 cavalier z24, right window stuck down, going to rain tomorrow. has been acting up, but could always get it up before now.


check the wires on the driver side door maybe one wire is broken in the harnes inbetween the door where the door hinges are if not the window motor needs replacing

Dec 02, 2009 | 1994 Chevrolet Cavalier

1 Answer

2000 saturn power windows,driver window does not


you would first have to make sure it is switch.Motors and regulators go out often. Does the drivers door switch operate passenger side ok? Can you hear any noise when switch is is up or down position?You would want to make sure all of this first. Door panel controls are easy to replace but you really want to remove panel and make sure you have good motor and window regulator.

Oct 27, 2009 | 2000 Saturn L-Series

4 Answers

2000 Saturn SL2 driver's side electric window. Motor works - but window does not go up and down, or goes part way, or goes crooked. What is the fix and steps to accomplish it "? . Also best method to...


Fore remove the door panel in a SL2, you have to take off the door handle. You have to disengage the door locking mechanism from the door handle, then unscrew the panel and take it off.

The door handle unhinges from the locks and from the window controls. If your windows are electric, just unsnap the cord attached and leave it hanging out.

You may have to work with the door handle as it won't come out of the slot very easily and you don't have a lot of room. A flat bladed screwdriver with a long metal piece should work to unsnap it.


ION, L-Series, S-Series 1999-2005 - Window Systems

Door Glass & Regulator
Power Windows
Diagnosis & Testing
Driver's Window Switch
  1. Turn the ignition OFF, disconnect the harness connector at the driver window switch.
  2. Test for infinite resistance between the signal terminals A and B and the B+ circuit terminal E with the passenger window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  3. Test for less than 2 ohms of resistance between the signal terminal A and the B+ circuit terminal E with the passenger window switch in the UP position. If greater than 2 ohms, replace the driver window switch.
  4. Test for less than 2 ohms of resistance between the signal terminal B and the B+ circuit terminal E with the passenger window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
  5. Test for infinite resistance between the signal terminals F and H and the B+ circuit terminal E with the driver window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  6. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal E with the driver window switch in the UP position. If greater than 2 ohms, replace the driver window switch
  7. Test for less than 2 ohms of resistance between the signal terminal H and the B+ circuit terminal E with the driver window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
Passenger's Window Switch
  1. Turn the ignition OFF, disconnect the harness connector at the passenger window switch. Test for infinite resistance between the signal terminals G and F and the B+ circuit terminal with the switch in the INACTIVE position. If less than infinite resistance, replace the switch.
  2. Test for less than 2 ohms of resistance between the signal terminal G and the B+ circuit terminal with the switch in the UP position. If greater than 2 ohms, replace the switch.
  3. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal with the switch in the DOWN position. If greater than 2 ohms, replace the switch.
Window Motor
  1. Install a 30-amp fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The motor should perform the UP or DOWN function.
  2. If the function does not perform as specified, replace the motor.
  3. Reverse the jumper wires; the motor should perform the DOWN or UP function.
  4. If the function does not perform as specified, replace the motor.
Removal & Installation
Window Motor & Regulator
  1. Raise the window to the full UP position.
  2. Remove the upper trim panel.
  3. Remove the manual window regulator handle, if equipped.
  4. Remove the power door lock switch, if equipped.
  5. Remove the pull cup assembly.
  6. Remove the door trim push-in retainers.
  7. Remove the screw from the trim panel.
  8. Pull the bottom of the door trim out to disengage the clips.
  9. Lift up on the door trim panel to disengage the inner belt molding from the door flange.
  10. Remove the door trim panel.
  11. Remove the radio speaker.
  12. Remove the front door water deflector.
  13. Disengage the door glass to the regulator sash channel clips. Separate the door glass from the sash channel.
  14. Push the window to the up position and tape in place.
  15. Loosen the power window regulator bolts.
  16. Remove the rear regulator bolt.
  17. Lift the window regulator, disengaging the loosened bolts from the door.
  18. Disconnect the regulator electrical connector.
  19. Remove the power window regulator from the door.
To install:
  1. Installation is the reverse of removal.
Window Switch
  1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs.
  2. Press the locking tab to remove the switch from the door trim panel.
  3. Disconnect the electrical connector.
  4. Remove the switch.
To install:
  1. Installation is the reverse of removal.

I hope helped with this; good luck.

Oct 21, 2009 | 2000 Saturn SL

2 Answers

2003 saturn ion 3 driver side window won't roll down.


It may mean a bad switch, regulator, or motor.

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can test the switch to see if it's the switch that's broken. If not, you can then pull off the weather seal and access the insides of the door

Aug 24, 2009 | 2003 Saturn ION

1 Answer

I hear a whirring noise from the driver side and rear doors


might be a faulty power window motors & switch (s)

Jul 22, 2009 | 1993 Saturn SL2

1 Answer

How do i remove the driver side door panel? i have a 94 saturn sl2.


There are two plastic slip pins that on the handle that will require a small pick to knock them out with. They will come out either pushing them towards the front of the vehicle or if you are pushing them out towards the back fender direction. Make sure that you aren't in gravel or grass since these pins need to go back in and are easily lost. After that, there are torx screw on the inside of the door. When you have removed all of them the skin of the door will remove from the outside.

Jun 25, 2009 | 1994 Saturn Sl

1 Answer

1999 Saturn SL2 drivers side window doesn't go down all the way then makes a grinding noise, when put up makes a grinding noise


It sounds like there is somthing wrong with the window regulatior ( the motor in the door that moves the window)
1.Remove the inner door pannel (all parts)
2. hook up the window controls & try moving window up or down, make sure window is moving propley in tracks and siscor arms are not bound up.
3.If all is well with the above stuff, just replace the window regulatior and test befor you reasembil the door pannel

Feb 25, 2009 | 1999 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...