Question about 2001 Ford Focus

1 Answer

How to replace code P0324 in 02 intrepid


Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 319 Answers

The Knock Sensor is very easily replaced. A better scanner will tell you which sensor is going bad on your transmission. An Autozone code reader will not tell you which sensor on the trans. is acting up. Most sensors on your trans. are very easity replaced as well. They just screw in and plug it. It's worth paying to get a "real" scan done. The trans. sensors are inexpensive and you can replace any other your listed sensors yourself.

Posted on Apr 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dtc Code P2314

2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ... > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

2 Answers


well both of these codes are transmission codes you should take it to a transmission specialist

Jul 16, 2014 | 2003 Dodge Intrepid

1 Answer

2001 dodge intrepid with p0201 code does the injector need replaced

Codes don't tell you what is wrong or have anything
to do with replacing parts

Codes are used to diagnose the system with the fault &
then component test

Feb 01, 2013 | 2001 Dodge Intrepid

1 Answer

Trouble Code P0871

Hello Paul, The P0871 code on your Intrepid is a fault code relating to the overdrive pressure sensor circuit. The most common fix is replacing the solenoid pack in the transmission. I hope this information was helpful.


Oct 08, 2011 | 2004 Dodge Intrepid

1 Answer

I'm looking for the engine codes for a dodge intrepid codes are 1391 - 0134 - 1684.... I am trying to replace the oxygen do you know which ones to replace?

1391 is a timing code cam or crank sensor
0134 bank 1 sensor 1 usually left front but double check
1684 doesn't match anything i know

Jan 30, 2010 | 1999 Dodge Intrepid

2 Answers

2000 Dodge Intrepid with PO455 code and stalling.

A code 455 most likely one or more of the following has happened
a loose or bad gas cap
a non-conforming gas cap
other leaks or damage pieces in the evap system

Inspect the evap system for cracks or breaks in lines listen for vacume leaks or strong gas fume smell and fix all lines you find that are damaged ..I know you say you put a new gas cap but make sure it a conforming cap..Hope this helps

Nov 14, 2009 | 2000 Dodge Intrepid

1 Answer

What is codes P016 Po441 P0135 2002 intrepid

016 is crankshaft position sensor. This needs to be diagnosed properly. Alot of times this part is replaced when an underlying condition is really the cause.
441 is an evaporative emmisions leak or a faulty purge or vent solenoid This vehicle also may have an vapor management valve so diagnosing is best so you dont replace the wrong parts when maybe the whole problem was a bad fuel cap or a vacuum leak somewhere.
And the 0135 is the 02 sensor heater circuit. This usually points to a faulty sensor and if so both upstream sensors will need replacing soon.
Now with all those codes I wonder if they happen all at once. There should be no way thier related but if they all happen at once I would start by removing the battery terminals and cleaning. And any grounds on the engine or body under the hood, clean them also. Most likely this isnt your issue but its the one thing you can do for free that might help. Then get the codes cleared. Disconnecting the battery may erase the codes.. If the codes come back you will need to get them addressed.

Nov 05, 2009 | 2002 Dodge Intrepid

2 Answers

2003 Chrysler Intrepid Sensor reads P0700

P0700 is a code in the engine computer telling you that you have codes in the transmission computer. You need to have the transmission computer scanned.

Jun 21, 2009 | 2003 Dodge Intrepid

1 Answer

Check engine codes 95 dodge intrepid

Code 12 is: Direct battery input to PCM was disconnected within the last 50 key-on cycles.

Code 21 is: Neither rich nor lean condition detected from the oxygen sensor input or oxygen sensor input voltage maintained above the normal operating range.

May 22, 2008 | 1995 Dodge Intrepid

Not finding what you are looking for?
2001 Ford Focus Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides