I need a wiring diagram (color coded) to wire trailer lights for a trailer w/trailer brake. I have the wires but don't know what color hooks up to what prong in the round trailer plug reciever
7way- black is 12volt (power), brown, running lights, yellow is left turn signal and stop light, green is right turn signal and stop light, white is ground, blue is brakes, and orange is aux power (can be back up lights, if trailer equipped w/ them). 6way is the same, minus orange wire. I have run into some variations to the above color codes (brown, yellow and green only-sometimes these 3 are different than stated, but only mixed as that group, as to what they control- example would be green is running lights, brown and yellow are turn signal and stop lights, the others should be as stated), if you have any trouble with things not working properly, it may be due to these variations, although the above are pretty standard. If you have an ohm meter you can check as you go (check for power at black wire- should be constant 12v, turn on turn signal and check for power-it will fluctuate from approx. 12 volts to 0 volts as the signal power pulses in the wire) hit the brakes, blue wire should show power, etc. Let me know if you need more help as you go.
2,855 views
Usually answered in minutes!
It is a 6way plug on the trailer.
Hi smithlpd274, do you have a 6 way or 7 way hookup?
need color code for 7 pin connector
color code for back up lights
×