Need close up picture of spark plugs in engine of 2003 mercury grand marquis

SOURCE: 2002 mercury grand marquis spark plug wire diagram

For the 4.6L V8:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
(back of engine)
4-----------8
3-----------7
2-----------6
1-----------5
(front of engine)

Let me know if this helped...

SOURCE: own a 1997 mercury grand marquis. went to change

The 4.6 does not have an traditional distributor. This year engine should have two coil packs located on the front of each valve cover. Each coil pack controls four cylinders. Some of the plug wires will cross over the front of the engine in a wire loom on top of the alternator. The spark plugs are located down in the intake manafold. they run beside the fuel rail on each side of the intake manafold where it joins to each head. You will need an extention at least 8 to 10 inches long to get at the spark plugs. The plug wire fit snuggly into the intake manafold and have an extention on them that connects to the spark plug.

Testimonial: "thanks, that's just what i needed to know "

SOURCE: where are the spark plugs located on a 2000 Mercury Grand Marquis

There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.