At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
why the inappropriate? gasve u the correct answer. why no post the real question 1st, this saves time and frustration. why the inappropriate? gasve u the correct answer. why no post the real question 1st, this saves time and frustration.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no not original transmisson not even on the vin plate
only engines are recorded on registration papers
..
vin plate decoded number will designate
CVT , std automatic or manual gearbox
mazda 3 BK series
will have a
designated gearbox fitted for the 2004 to 2008 models
production run
InstructionsOpen the rear deck lid on the Mazda 6.Carefully remove the plastic finishing cover from the license plate light housing, using a small flat-head screwdriver to release the locking tabs. Pull the cover downward and off of the deck lid, exposing the license plate bulb. Remove the old light bulb from the license plate bulb socket by hand. Wrap your new one in a paper towel and do not touch the bulb with your bare fingers. Insert the new bulb into the light socket. Install the finishing cover onto the light housing and push it upward until it clicks and locks into place.Repeat Steps 2 and 3 to complete the LED light conversion on the opposite side of the deck lid. Test the new bulbs by turning on the headlights on the Mazda 6. Mercedes Parts.
Doe's the back brakes work? Is number 7 and 15 hooked up right? If they are. Try backing up and hitting brakes, This will tigjhten them up.
1 – SUPPORT PLATE 2 – RETURN SPRING 3 – ANCHOR PLATE 4 – RETURN SPRING 5 – CABLE GUIDE 6 – PARKING BRAKE LEVER 7 – ADJUSTER CABLE AND SPRING 8 – SHOE RETAINER, SPRING AND PIN 9 – SECONDARY SHOE AND LINING 10 – LEVER SPRING 11 – ADJUSTER LEVER 12 – ADJUSTER SCREW ASSEMBLY 13 – SHOE SPRING 14 – PRIMARY SHOE AND LINING 15 – PARKING BRAKE STRUT AND SPRING
There is usually a small threaded metal clip behind the numberplate. This gives the screw something to thread into as the bodywork of the car isnt enough. If this is missing you could try drilling a new hole (smalled than the screw) in the area behind the plate to fix it to or a less permanent solution would be double sided tape.
I CAN'T SAY FOR SURE BY THE DESCRIPTION, BUT IT SOUNDS LIKE THE LIGHT FOR THE DEFROSTER, POSSIBLY TELLING YOU TO TURN IT ON, MAYBE BECAUSE OF COLD WEATHER.?
tracing short circuits can be tricky you need a good electrical knowledge and a bit of luck.what items are not working when the fuse has blown? concentrate on these items first follow the wiring back from these loads looking for chafed wires . if you cant see anything
put in a fuse and switch the affected loads on one at a time until the fuse blows when this happens youll know which circuit to concentrate on.
The lights should be accessible by reaching up above the license plate and finding the housing they sit in. For the guy with the shift indicator lights out, you will need to pull the center console and remove the bulb from the holder and pop the new one in.
open the boot and remove the carpet tailored to th boot. Easily done by gently undoing the plastic screws and pulling the gromet it sits in out i one piece. After removing the carpet acces to the lamp is easy.
cos there is three holes
why is there three holes for the number plate lights
×