how are the timing belts replaced and in what order.
Comments:
Apr 08, 2009
- okay, excuse me. Does anyone have a photo of how to replace the timing chains on a 2000 BMW 740 il? Just bought the car and the chains needed replacing, so I am stuck.
This model does not have timing belts, they are fitted with chains.
Comments:
Apr 08, 2009
- Is it the V8 or V12 engine, the V12 engine should have a lifetime warranty on the chains.
If you want to replace the chains your self it will not be an easy task as you will need special tools only available from BMW (well they were when I worked at BMW in 2005).
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas?...
(More)
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas? thank you
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas?...
(More)
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas? thank you
on a 1977 gmc pickup the fuel gauge does not work. I need to run a new wire from tank to gauge. old...
(More)
on a 1977 gmc pickup the fuel gauge does not work. I need to run a new wire from tank to gauge. old wire is nowhere to be found and there is no direct hookup to the gauge. it looks like it comes off of the fuse block but i cant figure out where. I need to know where to hook it up at. Can you help?
So I left my lights on today and it drained my battery almost entirely. I went to jump start the...
(More)
So I left my lights on today and it drained my battery almost entirely. I went to jump start the car, hooked up the jumper cables correctly to another running car, and my car won't start. I think the problem is that my alarm is activated, so when I turn the key, it doesn't do anything. It won't even try to start. But when i push the button on the pad to deactivate it, even with the jumper cables hooked up, it won't respond. i don't know what to do because I can't seem to disable the alarm system because my car is dead, but I can't start the car because the alarm is preventing the engine from reacting when i stick the key in. Does anyone know what to do? This is an after-factor alarm installment. I have a 2001 Honda Civic but Honda did not install this alarm.