Owners manual in french only need fuse panel diagram in english

http://knigaproavto.ru/shemy/en/ford/escape/270-2000-2007-ford-escape-fuse-box-diagram.html

Here is a link to the owner's manual, fuse information is in the section called "Roadside Emergencies" http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/07204og2e.pdf

Hard to believe that both of my motors went bad at the same time.

BTW, the first answer dealing with "From your owners manual:" (from Dennis Weid) is incorrect. From MY owners manual (2009 Ford Escape):
Fuse #11 - 10A Four Wheel Drive (I have 2 wheel drive)
Also, there is no relay #202 in the owners guide. The start with 'A' and 'B' and then run from 1 - 37.
I don't know where the responder got their information, but it is not accurate when comparing to my 2009 Owners Guide. Please correct this.
I have reviewed my Owner's Guide listing of Fuses and Relays and find absolutely zero reference to the circuits regarding the pumps. Thanks Ford.

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

The aux relay panel is not documented for some reason

You can find a list of Ford owner's manuals here:

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Just pick the year, make and model of your vehicle, and you will find the owner's manual for it. The fuse panel diagram will be found in the manual.

P.s. The Ford Windstar was replaced with the Freestar 2004-2006. Could it be another year or another model?

they are in the owners manual

If you look in the Owners Manual, there will be a picture and listing of the fuse placement. You will be able to see it right away if that fuse is the one blown. Also, there may be a diagram on the inside of the fuse box cover of which fuse it is and there should be a little tool there, a fuse puller, and a few spare fuses. Make sure you replace it with the right amperage fuse.

it is normal. that is your anti theft system flashing

For Ford's fuse diagrams and schemes you may want to check Ford diagrams schemes imgVEHICLE com