Cannott open rear door of my landrover discovery 300 series

this site lists the different engine sizes & their torques.
Land Rover engines

http://en.wikipedia.org/wiki/Land_Rover_engines

It may be a bad injector. Or something with the turbo not spooling properly.

which light are you referring too? Third light on door or one of tail lights?

its called the door stop as you listed.

Remove the 2 bolts holding the grab handle ( 10mm) Remove the screw holding the pull handle plastic cover and remove the cover. Use a fork and pry the panel away from the door and you will be able to pull it off. Before refitting, check all of the plastic clips that hold the panel to the door, some will have broken off. Remove them and fit them back on to the trim panel and glue them on. Refit is reverse as removal. Hope that helps

Hi:
You can usually get basic information on replacing parts that you purchase from the online autoparts stores, like www.autozone.com.

If you need really good guidance to replace your heater core, I suggest purchasing a 1 year subscription to www.alldatadiy.com For Approx $20, you can get step by step info on everything on your vehicle!

check the terminal at the back of the alternator prone for loose connection sqeeze it together and refit it.

dust in the switches!

Hi.

I had this problem on my discovery 300 tdi, behind the gove box is a black box bolted onto the small bulkhead if you open this, you will find a circuit board with 2 plugs going into it, this is the ecu for the windows you will find that there will be a dry soldier joint on the circuit board just check this, my discovery had the same problem, re-soldiered the circuit board and all works fine.

If you google for landrover forums you will find the answer on there.

hope this helps.