Cars & Trucks Logo
Posted on Apr 07, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

FUEL What should the fuel pressure be in my 2002 GMC 2500HD

1 Answer

Harvey N Tawatao

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • GMC Master 3,854 Answers
  • Posted on Apr 07, 2009
Harvey N Tawatao
GMC Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Apr 05, 2009
Answers
3854
Questions
0
Helped
2796693
Points
16501

160 MPa at idle and it reaches at least 158 MPa 
Good luck but i think there was a recall on the fuel system on your year and make of truck.
#04-06-04-007I: Service Engine Soon (SES) Light On, DTCs P0087, P0093, P1093, Low Power, No Start, Hard Start, Fuel in Crankcase (Replace All Injectors - New Strategy for High Fuel Return Rates) - (Aug 18, 2008)

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a 2002 chevy 6.0 2500HD, how much fuel pressure should their be

45 to 60 psi, running,,,,,if presure is low,, try changing the filter first, if it does not come up you will need a pump,,, its in the fuel tank
0helpful
1answer

My truck rough starts sometimes what is it ??

Replace the fuel filter, check out the fuel line pressure. Check for hidden codes. Fuel pump may be bad. Common GMC problem. Pump is located in the fuel tank.
2helpful
2answers

How difficult is it to change fuel pressure sensor on a chevrolet 2003 2wd 2500hd?

Hi!!

The Fuel Pressure Regulator is screwed into the fuel injector rail and all you need is a 1/2 or 9/16 open wrench and unplug the electrical connection and the vacuum hose. If you already know that the regulator is defective, I suggest you buy the new one first so you know how it looks like.

1helpful
1answer

My 2003 gmc 2500hd will not start. the battery is

check that the oil level is full and check to see if the low oil pressure switch has fallen off it's between the engine and firewall just below the distributor, als tun the ingtion key on and listen to see if you here the fuel pump come on for two seconds, if it does check fuel filter. if it does not check fuel pump relay and blowout prevention valve reset it if it's not allowing fuel to flow will bwe on same side of fill hose tank.
0helpful
1answer

Where is the fuel filter located on a 2002 GMC 1500 sierra

the fuel filters are in tank and not serviceable on most newer gmc trucks until the fuel pump dies
1helpful
1answer

How do I change the fuel filter on a 2002 gmc sierra duramax deisel? And where is it located?

becarfull, the fuel filter os on the passenger side of the engine compartment. after replacing the fuel filter you need to prime the system to get all the air out of the fuel system otherwise the engine will crank and crank and never start. if this happens, you'll need how to prime the system or tow the truck to the nearest Gm dealership.
read the owners manual for help.
2helpful
1answer

My 2002 silverado needed fuel (gas light on). Got

Check fuel pressure at injector rail. It should be at least 45psi.
If it is low replace fuel filter. If pressure is still low you will need a new fuel pump.
Dirt from the bottom of the fuel tank may have burned the pump or blocked filter.
1helpful
1answer

2003 gmc 2500hd fuel pressure

6.0 to 8.1.. is this any help to you
0helpful
1answer

Spuratic fuel gauge

the fuel gauge and fuel pump is one assembly in the fuel tank. You will need to drop the fuel tank. May be a loose connection or faulty sending unit
0helpful
1answer

Fuel pump

Requires a special fuel line removal tool available from most tool trucks Snap-on Mac
Not finding what you are looking for?

533 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...