How much oil does my tacoma 3l turbo diesal take

John, find which is Spark Plug Number 1.
Then remove all spark plugs
Place long straws down the Spark Plug Housing
Turn Crankshaft
Watch the straw go up and down while turning
Mark the straw at its peak (coming to the top)
Now you are at ATG's peak (diy/mechanics will say "TDC")

ATG
[email protected]

the high pitch noise and lack of power indicates air escaping under a turbo hose or a crack in the intercooler
possibly also that the boost dump valve is not operating correctly

Depends on how bad it was overheated and weather or not it was overheated because of low coolant level or air or coolant circulation Can be as bad as a cracked cylinder head or engine block, Seized and weakened cylinder rings causing low compression or oil burning, Can also cause scored pistons and liners, or even seize the engine right up so it no longer rotates

Toyota Hilux engine power loss Questions & Answers - Fixya

www.fixya.com > ... > Tags > engine power loss > Cars & Trucks > Toyota
Toyota Hilux cars & trucks engine power loss questions and answers. Ask your Toyota engine power loss related question. ... Question about 2006 Hilux 3.0.

if there is a lot of blue smoke its burning engine oil and the shaking is because the plugs are not firing correctly because they are fouled by the oil. also could be plug wires worn out, distributor cap and rotor if it has one as you don`t say what year this is. the burning oil could be rings, valve seals/guides, PCV system plugged.

As many as it takes to read full on the dipstick. The owners manual is also a good resource for fluid capacities. If you have 4-6 quarts on hand that should be enough to get you to the full mark after the oil change.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Check in this manual

http://www.championbrands.com/aera-torquespecs.pdf

If ur talking 50 mph in just first gear etc,Go see Don Gartlet or a Nascar Team

I will give you a link to the best turbo man I know, hes been in the business for over thirty years and can give you all the information you want, and tips and tricks to make the best setup. the site is http://businessfinder.oregonlive.com/2223473/Bell-Turbo-Corvallis-OR he is the top of the field even built a ford F350 that is the fastest in the wolrd low 8's I think really a nice guy to. Good luck and post a comment if he helped you his phone number is listed at the site as well.

next time replace the bearings all ways do that..... now you may have damaged your crankshaft. every mechanic nows to do that
if they dont they want more money