SOURCE: 1998 chevrolet cheyenne 2500 pick up truck
brake light switch or wire to it if not check fuses no power come out of switch that go to lock the shifter check it out HOPE IT HELP FIXYA OUR POST THANKS PIERRE
SOURCE: transfer case making roaring rattling sound
it's possible you might need to just change the trans case fluid.... it's a pretty simple task, i usually do all the small minor work first before i take it to a dealer to fix.... if they said you need a new trans case, but didn't tell you why, more than likely there might be something you could do yourself to make it better... those service men have been working around vehicles long enough, they should be able to tell you exactly what's wrong!
i would also do a tranny fluid change to... some of the noise could be coming from there too -- when you change either fluid, add a little lucas transmission fluid stabilizer, it helps alot with seals and makes the fluid stick to the gears better...
SOURCE: Where is the location of the knock sensor for a 2005 HD 2500 6.0
HAS TWO KNOCK SENSORS they are both under intake in valley of engine. remove intake and will see two black grommets they are under those best to replace both at same time
SOURCE: chevrolet 2500 crewcab - rear door auto lock shut off
try punching the remote lock button twice. experience with 4 door s-blazers shows that it has to be done twice to lock all 4 doors. also look for "child safety" switched for the rear doors that may be disabling remote locking for the rears.
SOURCE: why do the brake lights stay on my 89 chevrolet
Sounds like your brake light switch, which is behind the brake pedal, may have failed. They are simple and inexpensive to replace.
It looks like a bracket, that wraps around the brake pedal arm, and it has a cylinder type switch that makes contact with the brake pedal arm. When the brake pedal is pressed down it pushes the cylinder switch together which closes the circuit and makes you brake lights come on.
198 views
Usually answered in minutes!
×