Having a hard time disconnecting the electrical connector from the rear end of the bulb on the headlights from my 2003 nissan xterra. Thank you.
Loosen the mounting bolts and nut of headlight assembly (A)-Santa Fe
Click to Enlarge
Loosen the mounting bolts and nut of headlight assembly-Veracruz
Click to Enlarge
Take care that retaining clip (A) is not to be damaged-Santa Fe
Remove the head lamp bulb(s) with a counterclockwise turn-Santa Fe
Remove the headlight bulb after removing the bulb caps (A)-Veracruz
To install:
Fig. On some models, a rubber cover is removed to access the bulb-1.8L Passat model shown
Fig. Once the cover is removed the wiring can be accessed and disconnected-1.8L Passat model shown
Fig. The bulb is retained by metal bracket. The ends are squeezed toward one another to release them from their retainers-1.8L Passat shown
To install:
NOTE
Do NOT touch the glass portion of the new bulb. This will shorten the life of the bulb.
255 views
Usually answered in minutes!
×