2000 slk radio no sound fuses ok changes stations

It is a known issue

2006 300C Radio Display Has Gone Our, but Radio Still ...

300C Forums https://www.300cforums.com > threads > 2006-300c-r...
Feb 26, 2012 - Then the Radio LCD screen goes blank, but the radio and the preset stations still work fine. Once the LDC screen goes out, the radio controls ...
300C LCD Radio Screen goes out but radio still works?
Feb 26, 2012
8.4 screen blank, HVAC controls not functional
May 23, 2018
300 Stereo Problem (With Picture!)
Jul 26, 2014
2017 300C radio/uconnect issues
Jun 24, 2020
More results from www.300cforums.com

My Chrysler 300c 2006 radio screen is black, on/off work and

JustAnswer https://www.justanswer.com > chrysler > anxib-chrysle...
Sep 8, 2017 - This sounds like the display board in the radio has failed. But try rebooting the radio first by disconnecting the negative battery cable (in ...
1 answer · Top answer: Hello, my name is ***** ***** I will assist you today. This sounds like the display board ...

Q: 2006 Chrysler 300 limited edition radio screen went black.

YourMechanic https://www.yourmechanic.com > Questions
Jan 25, 2017 - I have a 2006 Chrysler 300 limited edition, and the screen went black on my rec nav. I can only change preset stations, eject CDs, adjust volume ...
1 answer · 36 votes: Hello. The issue you are having with your radio is a common problem with Chr

You need to input the radio security code because the battery was disconnected. If you don't have it see the Ford dealer (about $100.00 charge) or go here www.radio-code.com

Replace the radio

This is basically everything you will need to know for troubleshooting. The images may be out of order but here it is

May need radio code re input.did you disconnect the battery before this happened.?

Yes -I would check the fuses first when any electrical problem happens -cheers Denny

I know this is an old thread, but my 2006 325i Nav screen went bank also, but the radio still played. I noticed the glove box light and trunk light did not turn on also. I was told from mechanics is was probably a CID module for $2200, even though I mentioned the glove box and trunk light light were out and specifically inquired about a fuse. The mechanics never checked the fuses, because I checked my fuses in the glove box and found the fuse 61 marked with a BMW symbol that looks like light bulb was blown. The Nav screen started back up once the fuse was changed.

2008 Altima radio-the sound just quit working. Everything else seems to be OK. I can change the radio stations, but no sound. Is there a fuse that could be bad?

Sounds like maybe some pin switches for interlocks have gone bad. Open your trunk and look for the rubber booted switches and try holding them or shorting them, if you make the top move it shows you which ones are bad.

Manually turn to the station you are wanting and hold the number 1 button you wish that station to be on until it blinks and or makes a beep sound. then manually turn to the next station and hold down the number 2 button til the screen blinks again, and so forth.