Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
on most of the cars us use a special spanner tool that resembles a bent screwdriver. you pull the plastic cap out from the back of the drum and then just turn the ajustment wheel till you feal it tighten up a litle. Remember to put the plastic cap back on. Also a old trick most people don't know about is put the car in reverse in a parking lot, and slam on the brakes. most cars have a auto ajustment that they never use.
Posted on Sep 10, 2008
Bad PROPORTION VALVE ... the back brakes should only be doing 30% of the stopping with a bad proportion valve it will send more pressure to the back during braking and cause it to lock up. Good Luck and thanks for using FIX YA
Posted on Jan 04, 2009
It should be self adjusting (when u back up and apply the brakes, it adjusts ), and can also be manually adjusted (thru removal of the rubber plug on the backing plate). The adjuster (star wheel) can seize due to rusting and it won't adjust automatically or manually. Whenever u do a brake job, spray it w/ wd-40 and turn it back and forth several times to make sure it is free, then I put a dab of high temp. brake grease on the threads (only a small amount, as u don't want it dropping off and getting on the brake shoes).
Posted on Mar 23, 2009
Most rear brake-shoe design take some time to adjust than disc brakes...
If you have a special brake adjustment tool that your local automotive store sells, get this tool and pull out the rubber grommet plug, insert the brake adjustment tool until you 'feel' or hear the sound of 'skipping' on the brake self-adjuster spool inside as you wiggle /adjust the tool inside....(push it inside to get a firm feel that you can 'spin' it)
Try to push the tool downward or upward to check if that'll spin the brake self-adjuster part smaller to allow the brake shoes to 'shrink' which should allow you easy removal of the rear brake drum as you wiggle it out.
Be sure not to breathe in toxic brake dust upon successful brake drum removal.
Posted on Apr 05, 2009
FIRST adjust rear brake starwheel while spinning tire FOWARD. then alongside drivers side of car find emergency brake cable adjustment (long threaded rod with nut) . hold one end of rod with vise-grips and turn nut until emer. brake cable has less slack in it. now go inside car and apply e-brake.you dont want the pedal to stop right away but u also dont want too much"travel" in the pedal.so about halfway is IDEAL. IMPORTANT- once the brake cable is adjusted and the car wont roll foward in gear with the brake on and applying a little "gas"-make sure with brake OFF that rear wheels turn freely. hope this helps.
Posted on Aug 31, 2009
Tips for a great answer:
Oct 01, 2014 | 2007 Fiat Panda 1.2
Feb 16, 2011 | Mazda Tribute Cars & Trucks
Nov 02, 2010 | 1998 Ford Escort
Jun 15, 2010 | 1998 Ford Escort
Sep 03, 2009 | 1993 Ford F150 SuperCab
Apr 04, 2009 | 1997 Ford F150 Regular Cab
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: