Question about 2007 Tata Indica LSi

Open Question

Changing tail light bulb - 2007 Tata Indica LSi

Posted by on

  • Nikunj Raval May 27, 2014

    Hi dharmendhiran , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a taillight bulb on a 1986 dodge aries station wagon


Tail light problem '1986 Dodge Aries 4 Door - faqqq

www.faqqq.com/.../tail-light-problem-1986-dodge-aries-4-door-123242...
Question Product: 1986 Dodge Aries 4 Door Question Details: Tail light problem I ...Most people suspect a bad bulb and when they go to change it, it lights up.

Oct 16, 2015 | Dodge Cars & Trucks

1 Answer

How to replace, step by step, the rear brake light bulb on hyundai atos 1999?


How Do You Change Tail Light Bulb
Remove the wiring harness from the tail light lens assembly. Disconnect tail light bulb from the wiring harness socket. Reconnect the wiring harness to the tail light lens assembly. To confirm proper installation of the new tail light bulb, place the key in the on position.
IT IS VERY SIMPLE OR GO TO AUTOZONE AND HAVE THEM CHANGE IT OUT FOR YOU AND WATCH THEM ONCE. GOOD LUCK.

Jul 01, 2015 | Hyundai Cars & Trucks

1 Answer

All my lamp indicator lights keep flashing. blickers work. when you step on break the break lights work. but when driving no tail lights


First replace the tail light bulbs. The tail light and brake lights are different filaments in the same bulb. it is very possible for the tail lights to go out while brake lights still work. And somtimes the tail lights can blow out together.
If you change the bulbs and still dont work then look for other problems.

May 22, 2011 | 1992 Buick Park Avenue

1 Answer

How to change back brake light bulb n/s


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Apr 30, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

How do I replace a rear turn signal bulb?


Some bulbs can be changed without removing the tail light. First check to see if there is an access panel in the trunk trim near the tail light. If there is, you can twist the turn signal socket counter-clockwise to remove it from the unit. If there is no access panel you will have to remove the portion of trim blocking the tail light. This is usually held in by a few small clips. After it is removed you can follow the directions above.
Lastly, some models have to have the tail light removed to change a bulb. The bolts will either be behind the trunk trim or on the inside edge of the tail light.
Once the bulb is changed just reverse the steps to put it back together.
Good Luck!!

Mar 04, 2011 | 2000 Buick LeSabre

1 Answer

HOW DO I CHANGE MY REAR BRAKE LIGHT?


Open the Back and unscrew the tail light screws on the inside of the door jam. The whole tail light assembly will come out. Twist the bulb socket counter clockwise, pull the bulb out. Place new bulb in the sockett, place sockett back in tail light and turn clockwise till it stops. Place tail light back in hole, put screws back in to door jam to hold tail light in.

Feb 26, 2011 | 2007 Suzuki XL-7

1 Answer

How do I change a brake light bulb in a 1999 c70 volvo?


Welcome to FixYa.com
Brake Lamp Replacement

Location of the lights

Image

The illustration shows the locations of the lights on the RH side. The LH side is the same but

mirror-reversed.

The lights have the following functions:

- 1 +1 = Parking light Fail light

- 2 = Reversing light

- 3 = Fog light LH side only (LHD cars)

- 5 = Direction indicator

- 6 = Brake light

Image

Tail light changing bulbs

Ignition off.

Open the cover in front of the tail light

Undo the wing nut and take out the lamp holder.

Change the defective bulb.

Fit in reverse order.

Check that all bulbs lamps are intact and in working order.

Image

Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light Undo the panel partly in front of the tail light Unplug the

connector for the tail light Undo the four nuts securing the tail light see illustration.

Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

Check that all bulbs lamps are intact and in working order.Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician

Jan 27, 2011 | 1999 Volvo C70

1 Answer

Change out a taillight


You want to change the tail light bulb?

The process for replacing tail light bulbs is the same in all models. If you have a burnt-out tail light bulb, you may need to replace the brake light, the reverse light or the turn signal. The procedure to replace each of the bulbs is the same.



    Instructions

    1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.

    2. Remove the two screws from the tail light assembly. Pull the tail light out and inspect the back for two bulbs. The top bulb is the brake light and turn signal. The bottom bulb is the reverse bulb. Determine which bulb you need to replace.

    3Rotate the bulb's socket counterclockwise to disconnect it. Unplug the bulb from its socket.

    4Push the replacement bulb into its socket firmly. Insert the socket back into the tail light. Turn it clockwise to secure it in place.

    5Place the tail light into its cradle. Hold it with one hand and replace the Phillips head screws with the other.

Dec 03, 2010 | 2008 Hummer H3

1 Answer

How to change break lights


Tail Lights
  1. Open the endgate or liftgate.

  2. Remove the screws that retain the tail lamp assembly to the vehicle.
    32085_blaz_g0151.gif

    Tail lamp assembly removal

  3. Rotate the bulb sockets 1/4turn counter-clockwise in order to remove the bulb sockets from the tail lamp assembly.

  4. Remove the bulbs from the sockets.

To install:

  1. Install the bulbs into the sockets.

  2. Install the bulb sockets to the tail lamp assembly by rotating the sockets1/4 turn clockwise.

  3. Install the tail lamp assembly to the vehicle.

  4. Install the screws that retain the tail lamp assembly to the vehicle. Tighten the screws to 17 inch lbs. (1.9 Nm).

Oct 23, 2010 | 2000 Oldsmobile Bravada

2 Answers

Changing a rear turn signal bulb


in a lot of cases on modern motors i just remove the whole light ,its easier most of the time and this is a pick up so the chances are it sealed light and access can only be gained by removal

Jun 26, 2010 | 2004 Chevrolet Silverado

Not finding what you are looking for?
2007 Tata Indica LSi Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tata Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

old marine
old marine

Level 3 Expert

1992 Answers

David Harrelson
David Harrelson

Level 3 Expert

5316 Answers

Are you a Tata Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...