Question about Cars & Trucks
The button just popped out of place this morning and now will not work. The other windows work but not the passenger
Your situation like mine my window switch button broke also i am going to have to buy new window control switch dont think krazy glue will fix.
Posted on Aug 02, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need a philips screwdriver and a flashlight, and a telescoping magnet is recommended.
the best way to do this would be to empty your trunk, and lay in the trunk on your back with your legs hanging out and your flashlight pointed up at your work.
inside the trunk directly under the stoplamp you should see a connector, disconnect that and you should see a philips screw. remove the screw.
this part is a little tricky, shine the light up and to the left so that you can see the fastener that holds the bulb into the lamp. take your screwdriver, and place the tip on the flat part that sticks off of the bulb socket and press, so that you can turn it. once the socket is released, remove the bulb socket & bulb with its wire completely.
next, about 2-3 inches to the left of the rectangle where you removed the bulb & socket you should see a hole that is covered with a black foam. remove the foam from the hole, look straight up and you will see another philips screw. remove it, i recommend using a magnet to pull it from its hole after you've loosened it almost all the way, but whatever you do, do NOT do NOT drop that screw. it is almost impossible to retrieve and if you dont, it will rattle.
once you have both screws removed, get out of the trunk and go into the backseat and lift the 3rd brakelamp assembly off of the package tray; it may need a little negotiation, but be patient, it will come out.
once you have the stoplamp assembly out of the car, take the bulb socket, it should have a long flat tip at the bottom. take a pair of dikes and cut that tip completely off. replace the bulb, and install the bulb & socket into the lamp assembly, and re-install the lamp from inside the car, slowly and carefully slding it back into place. (hint, the more of the flat tip that you cut off, the easier it will slide into place).
once the lamp is back in place, hook up the connector, and re-install the screws, and you're done.
Posted on May 17, 2009
Tips for a great answer:
Apr 16, 2015 | 2009 Hyundai Sonata
Mar 17, 2013 | 2009 Hyundai Sonata 2.4
Aug 22, 2012 | 2001 Hyundai Sonata
Oct 12, 2011 | 2011 Hyundai Sonata
Apr 05, 2010 | 2006 Hyundai Sonata
Sep 24, 2009 | Hyundai Motor 2004 Sonata
Apr 11, 2009 | 2006 Hyundai Sonata
Jan 22, 2009 | 2000 Hyundai Sonata
Sep 25, 2017 | AC Cars & Trucks
109 people viewed this question
Usually answered in minutes!