Question about 2006 Ford Freestyle

1 Answer

Throttle body Dirtyhow can I clean it.

Posted by on

Ad

1 Answer

Buy CRC Throttle Body Cleaner
Instructions are on the can

Posted on Aug 01, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does the lightning bolt mean on a 2009 dodge avenger


Could be from a failing battery or you need to clean the throttle body. Get the cleaner's and google it and watch some videos on throttle body cleaning for your car. It isn't hard to do.

Oct 07, 2017 | Dodge Cars & Trucks

3 Answers

Engine idles a little high when in drive


check hoses for vacuum leaks also throttle body may need to be cleaned and or throttle body position sensor can be starting to be faulty or may require cleaning with throttle body --the following links show how to clean a throttle body look up the ones that do it in /on vehicle you dont have to remove it from vehicle
How to Clean throttle body GM 3800 throttle Body Tune Up Cable accelerator... Throttle body cleaning and idle relearn procedure

Jul 27, 2016 | 2006 Buick Lucerne CX

1 Answer

I'd like to get step to step instructions on how to clean the throttle body in my 2010 Jeep Patriot


  1. Purchase "02 Sensor Safe" throttle body cleaner spray;
  2. Drive the vehicle a few miles, bringing it to full operating temperature, then park it in your driveway with the engine still running;
  3. Gain access to the throttle body, and hold your thumb on the butterfly linkage so that you can open the throttle butterfly when the engine begins to load;
  4. Begin by spraying throttle body cleaner spray on all linkages around the throttle body. If the engine begins to bog because it is aspirating throttle body cleaner, quickly open the throttle butterfly to keep the engine running.
  5. Once you have cleaned all around the throttle body, spray cleaner DIRECTLY INTO THE THROTTLE BODY, opening the throttle sufficiently to keep the engine running. It will run rough during this process but try not to let the engine stall.
  6. If the engine stalls, restart it, and continue cleaning the throttle throat until you see clean metal.
  7. Pour some fuel system cleaner into the gas tank and drive the car a little more before parking it. Try to find an excuse to accelerate hard, WIDE OPEN THROTTLE momentarily if safely possible (as when accelerating to merge into traffic on a highway).
  8. Drive back home.
  9. Done.

Jul 19, 2014 | Jeep Patriot Cars & Trucks

1 Answer

Throttle body diagram


Buy a new-gasket, unbolt throttle-body,
spray carb cleaner inside of throttle body
let soak respray take a long Handel like
tooth brush an clean it once done spray rag
an push threw throttle body several times till
clean an reinstall. Don't get sensors wet at all
an unplugging sensors on some cars can
need car computer reprogramming so
do at your own risk

Jun 01, 2014 | 2005 Chevrolet Blazer

1 Answer

Throttle body sensor location 2005 uplander


the sensor is part of the throttle body and not replaceable here is the throttle body replacement instructions as you will have to replace the entire throttle body it is a very common issue with these
THROTTLE BODY ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
  1. Remove the air cleaner intake duct.
120434113
  1. Disconnect the electronic throttle control (ETC) electrical connector (1) from the throttle body (2).
113356645
  1. Remove the heater pipe nut at the throttle body.
  2. Remove only the heater inlet pipe.
113356646
  1. Remove the nuts and the bolts from the throttle body.
  2. Remove the throttle body assembly.
  3. Remove the throttle body gasket.
  4. Clean and inspect the throttle body gasket mating surfaces.
NOTE: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket surfaces and throttle body assembly may result.

Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.

INSTALLATION PROCEDURE
113356646
  1. Install a new gasket, if necessary.
  2. Install the throttle body assembly.
  3. Install the throttle body nuts and the bolts.
NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts and the bolts to 10 N.m (89 lb in) .
113356645
  1. Install the heater inlet pipe.
  2. Install the heater pipe nut to the throttle body.
Tighten the nut to 25 N.m (18 lb ft) .
120434113
  1. Connect the ETC electrical connector (1) to the throttle body (2).
  2. Install the air cleaner intake duct.

Feb 03, 2014 | 2005 Chevrolet Uplander

1 Answer

Throttle sticks at times ?


You probably need to clean your throttle body.

The best way to do this is to remove the throttle body from the engine so the back side of the throttle plate can be thoroughly cleaned with throttle body cleaner and a nylon brush.

CAUTION: DO NOT use a wire brush on throttle body components. DO NOT use any solvent containing methyl ethyl keytone. This type of solvent can cause severe damage to sealed bearings and other parts of the throttle body. DO keep the throttle body cleaner away from the throttle position sensor (TPS) and the idle air control (IAC) as much as possible or remove these items from the throttle body before cleaning.

Dec 16, 2011 | 2003 Buick Park Avenue

1 Answer

Chevy trailblazer 2007 P0506 & P1400 what are the solutions for these codes


Cleaning your throttle body should take care of both problems. Clean your throttle body with throttle body cleaner. First disconnect the battery, clean the TB with TB cleaner, must be nice and shiny. When finished, hook the battery back up and drive around for 20 minutes or so with all accessories off, so the computer will relearn a properly functioning throttle body.

Your computer learned some bad habits, so when you changed the battery, the computer thought the throttle body was clean and functioning properly. So when you changed it, this caused all your problems. Very common, keep your throttle body clean, should be done at least once a year. Total cost if you do it yourself is around $5, for the can of TB cleaner.

Apr 18, 2011 | 2006 Chevrolet Trailblazer

2 Answers

My 2006 Hyundai sonata reading on a code reader P2118, P2119, P2110


P2118 - Electronic Throttle Control(ETC) system is made of the components throttle body, Throttle Position Sensor(TPS)1&2 and Accelerator Position Sensor(APS) 1&2. The throttle body contains the actuator, the throttle plate and the throttle position sensor (potentiometer), which are integrated in one housing. The actuator consists of a DC motor with a two-stage gear. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. And it provides feedback to the ECM to control the throttle motor in order to control the throttle valve opening angle properly in response to the driving condition.

P2119 - associated

P2110 - A bulletin provides the procedure to clean the Electronic Throttle Control (ETC)
throttle body of Theta-2.0L/2.4L engine equipped vehicles. If a vehicle exhibits the
condition(s) listed below and deposits are found at the valve-to-bore interface inside the
ETC throttle body, clean the throttle body using the procedure described in this bulletin.

This throttle body cleaning procedure should be performed when diagnosing
the conditions listed below. Do not replace the throttle body prior to performing
this procedure.

Any of the following conditions may be caused by throttle body deposits:
• No start (due to throttle valve stuck closed or air flow signifcantly restricted)
• Rough idle or fluctuating engine speed at idle (due to air flow restriction)
• MIL "On" with DTC P2118 or P2119 occurring along with P2110:
• P2118: Throttle Actuator Control Motor Current Range/Performance
• P2119: Throttle Actuator Control Throttle Body Range/Performance
• P2110: Throttle Actuator Control System-Forced Limited Power

It seems CLEAR you have a STICKING butterfly plate in the throttle body.

Mar 24, 2011 | 2006 Hyundai Sonata

2 Answers

Why does my gas pedal stick while driving. 1995 isuzu rodeo. it happen when i try to accelerate. its worse when its cold.


The throttle-body (or throttle plate inside the throttle-body) is probably gunked-up with carbon deposits and needs a good cleaning.

Take the air snorkel off of the throttle body and look inside while holding the throttle plate open. If you have thick black deposits on the back side of the throttle plate, you can clean it by spraying some throttle body cleaner (Available at any parts store) onto a rag and using an old tooth brush to push the rag, clean all the black gunk out of the area.

I recommend an old tooth brush because using something hard like a screwdriver can scratch the inside of the aluminum throttle body and actually make the throttle stick worse. I don't recommend spraying the throttle body cleaner directly into the throttle body because it can end up in the air plenum where it may loosen some deposits that can cause severe engine damage.

Oct 17, 2009 | 1995 Isuzu Rodeo

1 Answer

Stalls at idle and in traffic


Your idle air control valve may be dirty with carbon and needs to be cleaned or replaced. Try cleaning it first by cleaning out the throttle body with throttle body cleaner, do not use carb cleaner since it's too corrosive to the throttle body gaskets. You can buy the throttle body cleaner at Auto Zone and they can help you, by giving you the information you need to clean out the idle air control valve which is in the throttle body. Good luck and this should helps. 

Sep 16, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
2006 Ford Freestyle Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...