Question about Cars & Trucks

Open Question

My ford bantam 1.3 rocam 2004 doesn't want to start no matter how many times I crank the starter, i end up by push starting. please help any advice will be much appreciated .

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I have ford bantam 1.6i rocam 2006 model. It Doesn't start, It doesn't pump the petrol, the is no power to fuel pump

Refer to your manual there is a switch that deactivated the fuel pump in case of accident, there is a switch by the pasangers feet that if in the up position is activated to stop the fuel...

Posted on Aug 30, 2012

diedusman
  • 1 Answer

SOURCE: Got a ford bantam rocam bakkie and wants to know where to locate it please help

It is on the gearbox side of the engine at the top. There is a black housing with a pipe coming from the radiator. That housing has 3 screws, unscrew the little adapter and you will find the thermostat.

Posted on Apr 03, 2013

SOURCE: Hi i have 2004 1.6 ford bantam rocam that wont start, all the dashboard light come on but thats it! Checked all the normal suspects, new starter, battery all fuses check and replaced the crank angle s

firstly,check that the car has spark and petrol,from there you can be assured that it is a electrical problem

Posted on Jul 13, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Ford bantam 2008 1600 Rocam,in the mornings it does not want to start,there is fuel and spark,if you push it it starts,and if started once it start all the time,what can be the problem?


Could be a low battery voltage causing the cranking speed to be low or a tired starter motor sucking up excessive current and leaving the ignition system too deprived to deliver a strong enough spark.

Certainly you should check the spark plugs and the spark power and quality, the battery voltage and perhaps service the starter motor if it is consuming too much current.

If these things make little or no difference it would then be wise to check the fuel pressure and injector spray patterns.
The positive crankcase ventilation system should be checked - if a valve is fitted that is defective the intake manifold vacuum can be affected at cranking speed.

Sometimes imperfect intake valve seats can affect starting. As combustion begins enough gas leaks past the valve seat to corrupt the next incoming charge, effectively weakening the mixture. Another possibility is the coolant or air temperature sensors.

Mar 10, 2017 | Ford Cars & Trucks

1 Answer

Why is my ford bantam 1.3 cranking but not starting?


probably the immobilizer has been activated
check fob key battery
reset the immobilizer using a scan tool on the ECM

Oct 09, 2015 | Ford Cars & Trucks

1 Answer

My ford bantam 2008 model rocam 1.6i xl does not start after accident when I bridge fuel pump it does start. please help


check for the reset button not sure where its located at on your vehicle if you have the owners manual it should show location most the time the button will trip after a accident or even a hard bump

Sep 26, 2014 | 2008 Ford Bantam 1.3i

1 Answer

Ford 1 3 rocam engine


bantam?
most cars, MPI injection the injector form a sandwich.
between the fuel rail, and the intake front tunnel tubes.
so remove the rail,
step s
remove battery neg lug, so some, odd person dont try to start car.
depressurize the fuel system per FSM.
then remove injector conn plugs.
the unbolt rail. bingo.

the FSM covers this, ask ford parts counter for this book.

The Ford Bantam is a coupe utility vehicle ("bakkie", "pickup", or "ute") produced by the Ford Motor Company in South Africa. It spanned into three different models and was produced in South Africa for the local market.

be safe.

Jul 09, 2014 | 2005 Ford Bantam 1.6i

2 Answers

I have ford bantam 1.6i rocam 2006 model. It Doesn't start, It doesn't pump the petrol, the is no power to fuel pump


Refer to your manual there is a switch that deactivated the fuel pump in case of accident, there is a switch by the pasangers feet that if in the up position is activated to stop the fuel...

Aug 28, 2012 | 2006 Ford Bantam 1.6i

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...