Question about 1995 GMC Suburban

Open Question

Where do I check power steering levels on a 1995 GMC Suburban

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: 1995 GMC Suburban. The interior power door lock switches not work

Take The Driverside Control panel Off The Door,And Check Conection On The Main Switches,These Vehicles Have Locks On Them, And If They get loose The Stop Working,Also Check The Little Switch Towards The Front of Panel,It Also May Be Loose,Use Caution,The Clips Are Fragile..

Posted on Nov 06, 2009

Ad
JJ_Barricade
  • 11 Answers

SOURCE: 1995 GMC suburban temp guage pegs high, but heater

Sounds like there may be an air pocket in the system.
Try 'burping' the system. If this still doesn't fix the problem, check the temperature of the heater core hoses (in and out) The inlet should be fairly cool, the other should be piping hot. If they're both cold; the heater core has an internal blockage.

Next, replace the thermostat with a winter (180-195 F) derivative.
Bleed the system accordingly, and keep me posted!

Posted on Nov 30, 2009

Testimonial: "Thanks. Very useful information, provided very quickly."

duane_wong
  • 6826 Answers

SOURCE: where do you pour the power steering fluid for the

There should be a power steering pump which is black which has a cap on it for filling power steering fluid to the proper level. It's a belt driven pump.

Posted on Aug 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 gmc suburban leaking power steering fluid at end of I think is steering column that hooks to something else but there is rubber seal like that is breaking apart that connects the 2 parts together? I...


Sounds like the pitman arm. See #5 on diagram below. It has a ball joint with grease that is held in with a boot. It the boot is cracked open, you should replace the arm. You will need an alignment after replacing the arm. The arm does not contain any steering fluid, so if that is leaking, you have another seal broken somewhere...
0996b43f8020d736-j3htnczknaudozykjt5jjhc0-4-0.gif

Jul 06, 2017 | 1995 GMC Suburban

1 Answer

How to check power steering fluid on 87 gmc suburban 2500 4x4


The power steering reservoir has a dipstick attached to the cap you take off to fill the reservoir, it is written on the dipstick what level is normal. Low fluid will not cause any play in the steering worn parts like tie rod ends and worn steering gear boxes will.

Sep 26, 2012 | Chevrolet Cars & Trucks

1 Answer

Remove ignition lock to switch link 1995 suburban


The ignition lock assembly contains two components: a lock cylinder to deter theft and an electrical portion that supplies power to electrical components such as the radio, electric windows, and windshield wipers. The electrical portion of the ignition switch also provides power to the starter motor to start the engine.
The ignition lock is an anti-theft device that prevents a vehicle from being driven unless the ignition key is in the ignition switch. If the ignition key is not in the ignition switch, it 's impossible to turn the steering wheel.
To replace the ignition switch cylinder lock, the trim panels around the steering wheel are removed. Then the tamper-proof hardware that attaches the ignition lock assembly to the steering column is removed. The ignition lock assembly is removed from the steering column, and the lock cylinder is replaced. The new ignition lock is reattached to the steering column, and the trim panels are replaced.make sure you dissconect battery first the 1997 had a recall on the ignition switch dont no if the 1995 had a recall if so they will replace for free

Dec 08, 2010 | 1995 GMC Suburban

2 Answers

Where do you pour the power steering fluid for the 1995 gmc suburban


into the Power Steering pump, the reservoir is at the rear

Aug 31, 2010 | 1995 GMC Suburban

1 Answer

95 suburban, ignition locks, can't turn key,


Remove the lower steering column cover and check to see if the rod from the ign. lock and tumbler to the ignition switch is binding up. If it's ok, you're problem may be the bearing under the steering wheel being broken.

Mar 29, 2010 | 1995 GMC Suburban

1 Answer

Hard too turn


If your steering wheel is too hard to turn, the first thing you need to do is check the power steering fluid level, it should be more then the minimum level.

Feb 09, 2010 | 1995 GMC Jimmy

1 Answer

Where is transmission fluid fill on '86 GMC Suburban


get a funnel and pour it into the dip stick hole that you use to check the fluid level with.

Jan 01, 2010 | 1986 GMC Suburban

1 Answer

Vehical makes noise from the power steering, but


Try to bleed all air from the power steering system:raise the front of the vehicle off the ground just until the tires are off the ground,start the engine,make sure the fluid is at the proper level,while engine is idleing turn the steering wheel from lock to lock in both directions( do not hold at full lock for more than a second) repeatedly,at a average turning speed back and forth about 10 to 15 times,shut engine off, lower vehicle,check fluid level once again,take out for test drive for at least 10 to 15 minutes,if noise is still present then it's time to replace the power steering pump.Good luck!

Nov 21, 2009 | 1995 GMC Suburban

1 Answer

1995 GMC Suburban. The interior power door lock switches not work


Take The Driverside Control panel Off The Door,And Check Conection On The Main Switches,These Vehicles Have Locks On Them, And If They get loose The Stop Working,Also Check The Little Switch Towards The Front of Panel,It Also May Be Loose,Use Caution,The Clips Are Fragile..

Nov 05, 2009 | 1995 GMC Suburban

2 Answers

Power stering 1999 GMC SUBURBAN


1. Air could still be on your power steering system after you replaced your pump.
2. There could be another reason why your having a hard time turning your steering wheel, have your steering linkages, camber, alignment checked, so as to prevent breaking yor new pump again
thank you for choosing fixya!

Nov 22, 2008 | 1999 GMC Suburban

Not finding what you are looking for?
1995 GMC Suburban Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...