Question about Cars & Trucks

1 Answer

2005 nissan x trail 2.2 diesel. Car runs fine, but everytime when stopping at a robot and you pull away there is no power. You switch the car off and start again then power is back.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 30 Answers

It sounds like like that youer glow plugs are not staying hot for some rezone it maybe that the car is not idling fasted enuff with enuff fuel mixter or air if i waer you i would see if maybe youer map sensir is not makeing the diesel hot enuff to keep the motor at run temppchers this will cuses this to happen fome time to time i hope this helped u out

Posted on Aug 01, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
pal03246
  • 726 Answers

SOURCE: Car dies while driving

I think that your crank angle sensor failed. Is the check engine light on?? if so, scan it and get code. If the code is P0335, than you need new crank angle sensor. Nissan has been having some problems with those even on other Nissan products. (Altima, Pathfinder and so on) Good luck.

Posted on Aug 03, 2008

lastech
  • 408 Answers

SOURCE: 2001 C240 loss of power at highway speeds.

hi,might be,you have a grounded wiring, or loss power no esp,try to check your fuel filter,ty

Posted on Apr 05, 2009

  • 599 Answers

SOURCE: Car stalls when idling at stop light

have the car checked when the check engine light is on,also a good scanner will be able to give you the history codes,get back to me with the codes and we'll go from there. you need someone with a professional scan tool

Posted on May 13, 2009

bnachos
  • 38 Answers

SOURCE: Hi all,

First of all you need to check the engine code being "spit out". If you don't have a OBDII reader, go to your local garage and have it read.... typically pretty cheap. DDE light can be caused by:

Contaminated fuel.
Wrong Fuel.
Injectors leaking back excessive fuel to tank.
In-line fuel pump (There are two, so it's possible to still get fuel at engine but not enough pressure to run it)
DDE Engine module relay failed
Fuel rail pressure sensor

There are many more possible faults but I have listed the more common ones.
You really need to know the fault code to determine the actual source....

Posted on Aug 01, 2009

  • 580 Answers

SOURCE: bmw 325i 2003 stall

Sounds like you have a small bit of dirt or grit in the fuel system when accelerating it is drawn with enough force to cut off the fuel supply then is released when engine at Idle.
1 run liquid fuel line/injector cleaner in 1 tank
2 check fuel lines for debris
3 change fuel filters
4 have fuel tank flushed
here is trouble shooting order less expense to greater.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 X-Trail interior lighting diagram


If you open other doors besides the driver door do the lights work? If so the door ajar switch is defective in the driver door. Also can you turn on the interior lights from the headlight switch control?

Jul 09, 2016 | 2005 Nissan X-Trail 2.0

1 Answer

My 2005 model Nissan Xtrail cant start but just cranks. i parked it fine


removed the two 'Fuel Pump' fuses from driver side fuse box located underneath the steering wheel. one is 10A (Red) and other is 15A (Blue). Then started the car, car started for couple of seconds before the engine went dead again. put back both the fuses, cranked the engine and it started fine, there was bit of smoke for first few minutes but it all cleared up.

Feb 16, 2016 | 2005 Nissan X-Trail 2.5i

1 Answer

Nissan X-Trail 2.2 Diesel 2001 White smoke coming from exhaust when driving not constant in intervals


White smoke usually indicates low compression pressures. Do a compression test to see if the rings are worn. Check oil consumption too. If the valve stem seals are worn then the engine will use oil too.

Sep 25, 2014 | 2005 Nissan X-Trail 2.0

1 Answer

Nissan Murano sound coming from engine area once engine is warmed up marble in a tin can sound.. only does this sound briefly when taking off from a stop.. after making the sound just briefly then goes...


its called detonation. you must be running regular gas in it. switch to super for few tank fulls. it will stop, but as soon as you put back regular, the noise will come back.nothing that will hurt the car, just annoying sound.

Jul 22, 2017 | 2005 Nissan Murano

1 Answer

Nissan x Trail I have 2003 Nissan X Trail 2.2


check power steering pump valves as the noise could be valve vibration from weak control springs
timing chains do not rattle it properly adjusted and the so called rattle could be the injectors/ needles operating correctly

Apr 18, 2017 | Nissan Cars & Trucks

1 Answer

Is there an easy way to drain an X trail fuel tank


No easy way really, the best way is to get hold of an external electric petrol pump, put this inline before the diesel lift pump (With plunger on top in engine bay) and run a hose from this into a container, you then supply power to the pump and wait for it to drain, Make sure you tow the truck to a gas station and fill it completely with diesel to dilute any remaining residue of petrol to avoid engine damage and make sure you don't rev the vehicle as soon as you start it, leave it to idle for ten mins or so to avoid injector damage.

Mar 05, 2012 | 2005 Nissan X-Trail 2.0

2 Answers

Both the windows and the locks (power) stopped working,,,,the fuse is fine,,,but dont know about the relay or the modual....is there a way to check with an existing relay


if you have 2 of the same relays in the fuse block, you can switch the 2 so you can check on the windows, if this fixes the problem just switch them back, and replace the bad relay, since you have 2 circuits that are failing, ( windows and Locks are normally separate) you may have an issue with the switches rather than the relay, if you have a meter , or `12 volts tester, you can check the switches, make sure you have power entering them first , then hold the switch in the up or down position, and see if the power is passing through the switch,, these switches are just basically a pass through of power, which depending on the position of the switch, ( up or down) transfers the power to the motor,, and the only thing that happens inside the switch, is the contacts pass power either directly straight through, or reversed, which gives you the up and down movement.

Sep 15, 2011 | Nissan Pathfinder Cars & Trucks

4 Answers

I have a Nissan X Trail 2.2 diesel (2004). It was


do a codes search look up how to preform on yahoo but you need codes for solution also you can find code solutions on yahoo too

Jan 08, 2010 | 2002 Nissan Xterra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...