Question about Cars & Trucks

Open Question

What size is a fox F7 two stroke engine - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the specs for a 1998 Chevy Cavalier Connecting Rod?


Connecting Rod's are VERY SPECIFIC for each engine. In Addition to getting the Right STROKE, Piston Pin Size, and Crankshaft Size, you need to make sure to get the Correct Bearings for the Crank. If you are not going to remove the Crank from the Engine, your BEST Option is going to be Purchasing a NEW Push Rod.

Apr 15, 2014 | 1998 Chevrolet Cavalier

1 Answer

Standard bore size mm


ENGINE 2 stroke single cylinder direct reed valve crankcase induction Liquid cooled 125 cc engine Cylinder size 124 8 cc Bore and stroke 54 x 54 5 mm 200 cc engine Cylinder size 175 3 cc Bore and stroke 64 x 54 5 mm 250 cc engine Cylinder size 247 7 cc Bore and stroke 72 5 x 60 mm 280 cc engine Cylinder size 272 2 cc Bore and stroke 76 x 60 mm 300 cc engine Cylinder size 294 1 cc Bore and stroke 79 x 60 mm I Cant put periods or commas so bare with me

Mar 15, 2014 | 1999 Daewoo Lanos

1 Answer

What is the standard size of diameter of the piston for hyundai accent 2002.


76.5 mm bore, 87 mm stroke, 10 compression ratio, double overhead cam and four valves per cylinder. I found this on Autobuy.com this was for the 1.6 liter engine.

Nov 23, 2011 | Hyundai Accent Cars & Trucks

1 Answer

I replaced both belts and set the number plug in the up position and adjusted cams and the car would not start. What's I'm doing wrong?


Don't know what size engine ,so assuming it's a six cylinder, 2 belts. There are two up positions on a cylinder. compression stroke and exhaust stroke. you could have the cam/s off 180 degrees.

Apr 27, 2011 | Hyundai Motor 2004 Sonata

1 Answer

I need the Firing order Diagram For a 1995 Ford Ecoline 350 1 Ton Van


Need to know the engine size. You have these choices:
4.2 L Essex V6
4.9 L inline-6
302 CID Windsor V8
351 CID Windsor V8
4.6 L Triton V8
5.4 L Triton V8
6.8 L Triton V10
7.3 L Power Stroke V8
6.0 L Power stroke V8
TD

Mar 10, 2010 | 1988 Ford Econoline

1 Answer

Where do i find the chassis and engine number


Chassis number is the same as your VIN# on the drivers corner of the dashboard near the glass. The engine number location varies with the particular engine but is rarely relevant to anything unless you are doing a vintage restoration.(most internal parts are interchangeable within certain engine sizes, outside components are vehicle and year specific) A replacement engine of the same size may carry a different number but the bore, stroke and compression ratio (stuff that matters) will be the same.

Jan 26, 2010 | 1999 Chevrolet Blazer

1 Answer

1967 PONTIAC 400 cu.in. ENGINE-What is the right number head for that year engine,also can I put a 1975 crank in a 67 engine block without machine work. THANKS FRANK


Pretty skimpy info there toolbox. Which engine do you have?
In 1967 Pontiac made 326, 400, and 421 engines. They all have the same main bearing size, 3.00 inches, rod size, 2.250 inches and the same stroke, 3.750 inches.
In 75, they only made the 400 and 455. The 75 400 uses the same crank but the 455 uses the same rod size but a larger 3.250 main, and 4.210 stroke.
So any year 400 crank will fit any other year 400, 389, or 350.
Google Kauffman Racing, Wallace Racing or Pontiac Dude.

Cheers

Matt

Dec 09, 2009 | Pontiac Firebird Cars & Trucks

1 Answer

Size of mazda mx3 fuel tank


It is the cylinder area times the stroke times the number of cylinders.

May 27, 2009 | 1995 Mazda MX-3

1 Answer

What size engine and transmission do i need for 24inch rims?


best bang for your buck 350 cid with a turbo 350 or 700r4 ... the 350 engine can be stroked out to 383 using the internals:pistons and crank from a 400 in big block... but just stroking a 350 on a hot tranny with low gears to drive those big wheels is important get a 4;11 low gear ratio you ll be able to drag that monster.

May 08, 2009 | 1987 Oldsmobile Cutlass Salon

2 Answers

VW Scirocco engine in Audi Fox


Yes, but... I'm guessing you're likely trying to install a more powerful engine, such as the VW 16v from the later Scirocco mk2 ('83 to '89, and I think the 16v was available from '85 or '86). The basic blocks are very similiar; on earlier engines most if not all bore, stroke, and bearing dimensions are the same in same years and displacement, allowing one to use Audi connecting rods (stronger the the VW rods), and some other assorted benefits. Your first major complication is the crankshaft. The VW engine and transaxle is oriented transversly, the Audi's is fore and aft. Different transaxle and entirely different clutch mechanism. The Audi's clutch is fairly traditional, but the VW's is sort of reversed, with the pressure plate operated by a push rod running throught the center of the mainshaft. Result of which is; the crankshaft nose is different. You'll either need to machine the VW crank to mate to the Audi clutch assembly, or swap the Audi crank into the VW block. For reference, I strongly recommend Bentley Repair manuals; these are basically factory manuals sold to the public. For more and better information as to your specific intent, I suggest you try to find local VW or Audi clubs, or a really experienced VW/ Audi repair shop. A good mechanic who has been worked on these machines for years can probably help you get targeted on exactly what you will need to acquire to do the exchange. As I said, it's helpful that VW and Audi are so closely related, I'd guess it's a fairly simple process, bearing in mind that "simple" in context means an engine teardown and rebuild, installing the correct fuel injection and engine management components in the Fox, etc. And finally, if you do this swap; don't forget that more power brings other complications. You'll want to upgrade your brakes at least, and probably other suspension gear. Hope this helps, good luck.

May 15, 2008 | Volkswagen Scirocco Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...