Question about Cars & Trucks

Open Question

Audi a6 ignition switch

I reset my service reminder and after that the lights, climate control and blinkers are not working. Once i start the car i have to use the key and click it once back so that all is working. by doing that the brake lights and ABS stay on. What can i do.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: How do you reset service stability control & ABS

please send $100 to me and ill send you solution.. I was interested in your service until i heard some of your answers like requires expert must take to pro??? gee thanks for $15 advice

Posted on Sep 26, 2008

Ad
Brian032472
  • 150 Answers

SOURCE: Abs/Brake Light ON, although new brakes, ABS still works

I would suspect a speed sensor.

Posted on Jan 30, 2009

  • 1 Answer

SOURCE: 2002 Chevy Impala Traction control /ABS problem

i have a 2002 chevrolet impala and the same thing happened to me. abs light came on as well as my traction controll light. when i would step on the gas or brakes my car sounded like the brake pads were skiping against my rotors. i had my hub sensor replaced 5 times. the machanic kept telling me it was the part that need to be replaced.they hooked it up to have a dianostic done and the computer keep telling them to replace the hub sensor. so finally we brought my car to an electric auto shop. they found it was a loose wire that was turning my brakes on and off.(haywire)they fix my car in 30mins.

Posted on May 27, 2009

  • 273 Answers

SOURCE: abs and brake light is flashing on my 99 audi a6

you prob need a new abs sensor

Posted on Jun 06, 2009

  • 4 Answers

SOURCE: abs and brake light is flashing on my 99 audi a6

If you need to repair the brake module, there is a fantastic article, complete with photos, at http://www.audiworld.com/tech/elec116.shtml

I followed this example for my '98 and now it works perfectly. I found a shop on eBay to rebuild my module (lifetime warranty) for under $200. It took me about 1 hour to pull it off and about 45 min to put it back on with minimum shop tools

Posted on Jun 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 audi a6 ignition switch wiring diagram


Take out the 30th fuse from SB42, in the instrument panel fuse box for 30 seconds and then reinstall. This will reset the control module.

Jun 23, 2016 | 2008 Audi A6

1 Answer

How to replace audi a6 3.2 climate control


Yes it needs to be coded and adapted for that car so it works with equipment installed . Depending on year it may need to be released from component protection mode, thats an anti theft mode.

Mar 01, 2015 | 2006 Audi A6 3.2

1 Answer

How I reset service light on 2006 a6, 3.2 engine


This should be the procedure for your model!

Press and hold spanner button - then switch on the ignition. One of the following messages appears in the display
"SERVICE IN ____ MILES" or "SERVICE!".

Press the reset button - until either of the following messages appears in the display:
"SERVICE IN ____ MILES ___DAYS" or "SERVICE!".

after about 5 seconds the display should go back!

Oct 28, 2014 | 2006 Audi A6 3.2

1 Answer

How Do i reset service on my Audi A6 2.5 T.D.I.


Vehicles on longlife service intervals must have the service interval indicator reset using suitable diagnostic equipment. Vehicles on fixed interval servicing can be reset as follows: Press and hold button [A] 84764. Switch ignition ON. The words "SERVICE" or "SERVICE IN xxxx MI" will appear in the trip recorder display. Release button [A]. Press button [B] to reset the display. The words "SERVICE IN 10 000 MI" will appear in the trip recorder display. Switch ignition OFF.
BUTTON A IS LEFT OFF SPEEDO
BUTTON B IS RIGHT OFF REV COUNTER

Jan 29, 2010 | 2002 Audi A6

1 Answer

My blinkers won't work, the light just stays on (not blinking) do I need to replace the flasher? Where is it? The hazards work. It's a 2003 Audi A6


The relay is built into the hazard switch. It could be that or the turn signal switch. Try the hazard switch first (it's relatively cheap). If that doesn't do it, you'll have to replace the turn signal switch, which involves removal of the steering wheel and airbag.

Oct 31, 2009 | 1999 Audi A6

2 Answers

My audi 2001 A6 just had the oil changed but my "service light" is going on and says service in 100 miles. Did they forget to reset the computer?


Yes, It sounds like they did not reset the maintenance reminder. refer to your owners manual for instructions on how to do so...
Chevy forgets to do that to mine just about every time!!!

Feb 27, 2009 | 2001 Audi A6

4 Answers

Starter is turnig but not firing


Starter switch. Plastic and cheap, my 98 A6 did the same thing... I replaced thousands in parts, turned out to be a cracked ignition switch which is a very common Audi problem!

Jul 20, 2008 | 1998 Audi A6

2 Answers

1999 audi a6 quattro wagon


No sweat. This is a periodic reminder that your car is due for some sort of servicing, usually based on mileage. It may say "service oil" or "inspection" or some other indication along those lines. This is not related to a check-engine light, which tells you that you have something wrong with your car. The inspection reminders are manually resettable with the small stalks on the instrument cluster, and are meant to be reset each time a service interval is reached and that service is completed.

On my A4, the reset is this way: with the ignition off, hold down the stalk on the right, by the odometer, and turn the key on (don't start the engine). The display goes to "------". Pull out on the other stalk to reset it. Turn the key off, and release the right-hand stalk. When you turn the key back on, the indicator should be cleared. It may be different on your A6, but try it that way and see if that clears it.

Jul 07, 2008 | 1999 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...