Question about Cars & Trucks

Open Question

Oil change ford econovan maxi 2000 - Cars & Trucks

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how much oil in my van

How much engine oil does my 1994 E-150 econoline van hold with a 351 engine

Posted on Aug 20, 2009

  • 2510 Answers

SOURCE: van barley moves in reverse

It could be a myriad of things, start off by checking the transmission oil level and also look if it is black This would signify that the valve passages could be clogged or that there is something further amiss in the transmission.

Posted on Jan 30, 2011

  • 836 Answers

SOURCE: Whats the gap on the

The 1991 vans did not have points, they have a fully electronic igntion system.

Posted on Feb 12, 2011

  • 161 Answers

SOURCE: Unidentified hose. I have a Ford Econovan, which

2nd hose is for you positive crankcase ventilation(PCV) valve hose....(like a breather hose)

Posted on Mar 20, 2011

Testimonial: "Called the service center and read the Haynes manual, they both say the same thing. Spot on!"

SOURCE: 1998 ford econovan maxi losing

Any fuel coming back from intake sounds
like a timing chain or belt issue --just a guess

Posted on Jun 12, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My 1993 ford econovan maxi engine is missing - what is the likely cause?

missing check the spark plugs is the first thing to look at. check the color of them, if any of them are wet or if one is not the same color as the rest. check these first.

Jun 15, 2017 | Ford Cars & Trucks

1 Answer

I have a 1993 ford Econovan maxi . I have ignition point . What is the gap on the ignition point . Thanks

point gap is .40 to .50 mm ( point 4 to point 5 mm) or .015 to .20"
most point distributors are at the .02 " mark but check and adjust as points to wide will misfire under load or lack power if too close
point gap variations can change ignition timing

Nov 20, 2016 | Ford Cars & Trucks

1 Answer

Hi. What type of oil do I use on my Ford Econovan y.2000. The engine is FE2000

You can use a 10w-40 grade premium oil or synthetic blend oil
a fully synthetic in 5w-30 grade which is better but more expensive.

When selecting the oils in either grade make sure the one you choose is approved for Ford vehicles by checking the label details. Oil companies manufacture 2 or 3 different formulations of oils in the same grades and the label (usually the back label on the pack) will indicate that the oil is formulated for the engines of specific car manufacturers.

Jan 02, 2016 | Ford Cars & Trucks

1 Answer

How much water goes into the cooling system of a ford econovan maxi 1995

depending on which engine you have ,you are looking at 12 to 16 litres when empty

Feb 23, 2015 | Ford Cars & Trucks

1 Answer

FORD ECONOVAN MAXi 2.0 Hi, i have a serious creaking and groaning noise from the front nearside when I hit a bump or speed hump could I need a new shock absorber? I dont get the bump I would expect

It could be your shock/strut for sure. It could also be other suspension parts like the control arm or ball joints but I would suspect shocks first. If you arent extremely proficient, I would leave this repair to the pros. It isnt hard but it is incredibly dangerous. To get the old shock off you need to compress the spring with a special tool, and once it is compressed, it is like a bomb waiting to go off and could easily kill you. Take it to a shop and have them confirm the problem then do the repair. It should be around 150 for the part ( or less!) and another 100 for the labor.

Jul 10, 2014 | 1992 Ford Econoline

1 Answer

Van barley moves in reverse and drive. its a auto econovan maxi.any ideas would be great

It could be a myriad of things, start off by checking the transmission oil level and also look if it is black This would signify that the valve passages could be clogged or that there is something further amiss in the transmission.

Jan 30, 2011 | 1997 Ford Econoline

2 Answers

Valve clearances for a ford econovan 1.8lt, 1990

what are the valve clearance specs for a 1990 ford econovan maxi

Mar 14, 2010 | 1989 Ford Econoline

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides