Question about Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!
Posted on Jan 31, 2009
i do believe you have to take the passengers side dash apart behind the glove compartment. go to autozone and get a manual or go to the library and check the chiltons manual. this is not an easy job. how bad is the leak? if its not bad these heater cores are made of all aluminum. i would buy a bottle of that radiator additive and see if that takes care of the problem first. it only cost about 5 bucks a bottle and it may permanantly fix your problem.
Posted on Aug 13, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.
Posted on Aug 14, 2009
You don't need to drop the tank to replace the fuel pump.
Under the carpet in the trunk there is a access cover that you can take off to access the pump. You need a good snap ring pliers to get the snap ring off to release the pump from the tank.
I wish people would have first hand knowledge of the process before they start clicking post and cost a person a lot of money and time for something that isn't needed to be done to complete the job.
Posted on Oct 11, 2009
Tips for a great answer:
Aug 27, 2014 | 2002 Pontiac Grand Prix
Sep 21, 2011 | 2002 Pontiac Grand Prix
May 24, 2011 | 2002 Pontiac Grand Prix
The fuel filter is located under the car on the driver side, between the front and back door.
Your fuel pressure should be 53-59 p.s.i. Change your fuel filter first and see if it goes up. But like you suspect it is likely your pump. The pump is an assembly with the gage sender included is around $485 retail.
Thanks for choosing Fixya!
Feb 06, 2011 | 2002 Pontiac Grand Prix
Dec 11, 2009 | 2000 Pontiac Grand Prix
Aug 18, 2009 | 2001 Pontiac Grand Prix
Jul 12, 2009 | 2002 Pontiac Grand Prix
Jun 25, 2009 | 1996 Pontiac Grand Prix
Jan 23, 2009 | 2000 Pontiac Grand Prix
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: