Question about 1997 Chrysler Cirrus
Is the check engine light on, and have you checked fuel pressure with a gauge ?
Posted on Jul 31, 2013
Testimonial: "yes it is and no"
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the valve cover gaskets were leaking oil around the spark plug boots making the boot swell and causing a voltage leak. the engine misfired and stop lights. i did a tune up with new cover gaskets,plugs, wires, cap and rotor and she runs like a top. vrooom, vrooom!!
Posted on Apr 25, 2009
A tee is located to the right hand side of the intake manifold, on top you should see the coolant system cap, its silver in color and is about 2-3 inches in diameter. This tee is the thermostat housing, it goes to your radiator and engine block, remove it from the block and you should see the thermostat. Remember when replacing the thermostat, the spring side goes into the block! 2.0L and 2.4L it is under where the upper rad hose hooks to the engine. 2.5L it is under where the lower rad hose hooks to the engine.
Posted on Dec 29, 2009
One needs a special tool called a 'spring compressor' to compress the front strut spring enough to remove the nut on the strut. Very dangerous without the tool. Must use the spring compressor to service the strut assembly, or get a loaded strut/spring assembly to replace old strut assembly.
Good luck on this.
Posted on Oct 28, 2010
Tips for a great answer:
Nov 24, 2015 | Cars & Trucks
Aug 31, 2015 | Chrysler Cars & Trucks
Dec 05, 2010 | 1997 Chrysler Cirrus
Sep 02, 2010 | 1997 Chrysler Cirrus
Feb 04, 2010 | 1997 Chrysler Cirrus
Nov 10, 2009 | 1997 Chrysler Cirrus
Jun 13, 2009 | 1997 Chrysler Cirrus
Jan 24, 2009 | 1999 Chrysler Cirrus
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: