Question about 2010 Ford Focus 2.6

Open Question

2010 Ford Focus S won't turn over, says check brake system

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

lee_warwell
  • 10 Answers

SOURCE: my ford focus 2010 gas pedal vibrates

YOU MAY HAVE A LOOSE TIRE

Posted on May 07, 2012

skychief2001
  • 21873 Answers

SOURCE: When breaking my 2010 ford focus has a loud kocking noise from rear

I would pull the wheels and look for something loose on the brakes, such as a spring or self adjuster. Also look at the backing plate to see if it is tight.
Keep in mind it may be something covered by the car's warranty.

Posted on Jul 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 Ford focus sel, abs light is on


That means the antilock brakes did not pass initial test the brake module performs. Check all the sensors under the tires.

Mar 06, 2017 | Ford Cars & Trucks

1 Answer

Ford Focus 2010 2.0 tdci titanium makes an emergency stop on its own


Hi
that sounds extremely dangerous!
I assume you have an electric handbrake mechanism.
Best bet would be to have a diagnostic test carried out to check the speed sensors and brake controller....asap!

May 04, 2016 | 2010 Ford Focus 2.0

1 Answer

How hard is it to change an ignition switch


Not that hard if you are mechanically inclined. The flat rate book time is .8 of an hour. You need to remove the steering wheel bezel covers and the switch is held in place by clips.

Jun 14, 2015 | 2010 Ford Focus 1.6

1 Answer

2010 ford focus won,t come out of park no signal lights radio or headlights or brake lights


The car needs the brake to activate a switch to start it and to unlock the transmission. I would look into the brake switch for this problem

Apr 13, 2014 | 2010 Ford Focus SE

1 Answer

Keyless ignition


2010 focus wont start, what is happening ? you have the fob in car, you step on the brake and push start button, does dash lights come on? does the engine spin trying to start but does not ?

what are the symptoms ? is the battery dead? do you have inside lights ?

Aug 12, 2012 | 2010 Ford Focus 1.6

1 Answer

When breaking my 2010 ford focus has a loud kocking noise from rear


I would pull the wheels and look for something loose on the brakes, such as a spring or self adjuster. Also look at the backing plate to see if it is tight.
Keep in mind it may be something covered by the car's warranty.

Jul 26, 2012 | 2010 Ford Focus 1.6

1 Answer

2010 fusion tail lights won't turn off


I suggest check brake switch, underdash, top back side brake pedal or some short/ground there.

Apr 23, 2012 | 2010 Ford Fusion 3.5

Not finding what you are looking for?
2010 Ford Focus 2.6 Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...