Question about Nissan Cars & Trucks
Have you checked the computer for trouble codes ?
You should have a code for the speed sensor on the transmission as well as other codes.
Posted on Jul 31, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You need to check the transmission fluid level, if it is low the tranny will not shift. If, however, the fluid is to the proper level then you will need a new transmission.
Try putting new fluid in and look for a leak in the pan gasket, then all you may need is a transmission service. When the service is done the mechanic will look for pieces of metal in the old fluid, if found this is very bad and you will need a new tranny.
You might consider a new or used car, you can definately find a good deal out there!
Posted on Nov 16, 2008
do not flush the trans, that will make it worse.
My friend you have no second gear, you need trans rebuilt.
If you flush it now you can cause more damage.
Posted on Mar 10, 2009
the 2/3 shift solenoid is most likely shot not an easy job its inside the valve body agood tranny shop should easily diagnose this
Posted on May 30, 2009
Dont think they changed it yet but the older chrysler units had a rod that went from the throttle linkage to the transmission (maybe a cable now)...If you lengthen the rod it will increase shift pressure and give you an earlier shift.
Posted on Jul 17, 2009
Tips for a great answer:
Aug 22, 2014 | 2004 Nissan Maxima
Mar 23, 2013 | Cars & Trucks
May 28, 2012 | 1998 Nissan Frontier
Dec 13, 2010 | 2005 Nissan Altima
Jul 05, 2010 | 1990 Nissan Pulsar
Jul 17, 2009 | 2002 Dodge Dakota Club Cab
May 29, 2009 | 2004 Nissan Maxima
May 07, 2009 | 1994 Nissan Quest
Feb 25, 2009 | 1996 Nissan Maxima
Jul 17, 2018 | Nissan Cars & Trucks
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: