Question about Cars & Trucks

1 Answer

96 crown Victoria wont start had the problem couple weeks ago guy said the idle control was off now I guess doing it again I cleaned it but still wont turn over

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 5,332 Answers

When you say it wont turn over that implies that you can not hear the starter turning the engine over. If you can hear the starter cranking the engine over but the engine will not start try holding the gas pedal to the floor. Be prepared for the engine to start and let off the gas. If the engine stalls when you let off the gas try starting again but feather the gas pedal after it starts. It it stays running with the pedal depressed than I would agree that there is an issue with the IAC and it may need to be replaced.

Posted on Jul 31, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 58 Answers

SOURCE: headlights wont stay on

LCM is bad. Do not buy used one - they all have problems. Rebuild service available, email to ginolena@sbcglobal.net

Posted on Jul 25, 2009

bigv198921
  • 1 Answer

SOURCE: 1992 crown vic 4.6l

Check the ground cable I had a bad ground on my 92 vic I replace the starter the battery then I found out the ground cable was bad replaced it and it starts prefect now

Posted on May 17, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 crown victoria possible trans slip


I would say your 90% assured the trans was neglected & has failed

That is what happens to ALL transmissions, that are driven hard,never change the fluid every 3 years & continue to drive when the trans acts up

You did the correct thing,you just bought the problem

Apr 11, 2014 | 2003 Ford Crown Victoria

1 Answer

My 1996 crown victoria want start


possibly the fact it was an obd1 engine and the 96 is obd2

Dec 25, 2012 | 1996 Ford Crown Victoria

1 Answer

2001 crown vic 4.6l maybe twice a week i go to crank the car and it sputters real bad and eventually dies. After it dies i clean the throttle body and then it runs fine. What is causing this?


I would replace the dle Air Control solenoid. I know its a guess, but its a common thing. when cranking the engine, the idle should flare high, and then slowly down to idle speed.

Dec 06, 2010 | 2001 Ford Crown Victoria

1 Answer

Won't start while hot, wait an hour fires right up and runs / idles /drives smooth


FORD: 1995-96 CONTOUR, CROWN VICTORIA, ESCORT, TAURUS, THUNDERBIRD
1996 MUSTANG LINCOLN-MERCURY: 1995-96 CONTINENTAL, COUGAR, GRAND MARQUIS, MARK VIII, MYSTIQUE, SABLE, TOWN CAR, TRACER LIGHT TRUCK: 1995-96 AEROSTAR, BRONCO, ECONOLINE, F-150-350 SERIES, RANGER, WINDSTAR
1996 EXPLORER This TSB article is being republished in its entirety to include the 1995 4.6L Thunderbird/Cougar. ISSUE: After a 1-4 hour engine soak time, long crank times and/or long crank to start followed by a stall may occur on some vehicles. No further stalling or rough idle will occur after the engine is running. The long crank and/or stall may be due to the Idle Air Control (IAC) Valve sticking.
ACTION: Replace the IAC Valve with a revised IAC Valve if no Diagnostic Trouble Codes (DTCs) are present. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
  1. Perform normal diagnostics and correct any DTCs as required by referring to the appropriate year Powertrain Control/Emissions Diagnosis (PC/ED) Service Manual.
  2. If no codes are present, replace the IAC Valve by referring to the appropriate model/year Service Manual, Section 03-14. Refer to the following Idle Air Control Valve Application Chart for proper IAC usage.

    IDLE AIR CONTROL VALVE APPLICATION CHART Model Year Vehicle Engine Revised Part Number PASSENGER CARS 1995 Escort/Tracer 1.9L F5DZ-9F715-BA 1996 Escort/Tracer 1.9L F6CZ-9F715-BB 1995 Contour/Mystique 2.5L F5RZ-9F715-AB 1996 Contour/Mystique 2.5L F6RZ-9F715-AA 1996 Taurus/Sable 3.0L 4-Valve F5DZ-9F715-DA 1995 Taurus/Sable 3.0L 2-Valve F5DZ-9F715-EA 1996 Taurus/Sable 3.0L 2-Valve F6DZ-9F715-DA 1995 Taurus SHO 3.2L F6DZ-9F715-CA 1996 Taurus SHO 3.4L F6LZ-9F715-AC 1995 Taurus/Sable 3.8L F68Z-9F715-EA 1995 Crown Victoria/Grand Marquis/Town Car 4.6L 2-Valve F5PZ-9F715-AA 1996 Crown Victoria/Grand Marquis/Town Car/Mustang 4.6L 2-Valve F6AZ-9F715-EB 1996 Mustang 4.6L 4-Valve F65Z-9F715-BC 1995-96 Continental 4.6L 4-Valve F5OZ-9F715-AB 1995 Mark VIII 4.6L 4-Valve F3LZ-9F715-AA 1996 Mark VIII 4.6L 4-Valve F6LZ-9F715-AC 1995 Thunderbird/Cougar 4.6L 2-Valve F5PZ-9F715-AA 1996 Thunderbird/Cougar 4.6L 2-Valve F6AZ-9F715-EB LIGHT TRUCKS 1995-96 Ranger 2.3L F5OZ-9F715-AB 1995-96 Ranger 3.0L F67Z-9F715-AA 1995 Aerostar 3.0L F68Z-9F715-DA 1996 Aerostar 3.0L F69Z-9F715-AA 1995-96 Windstar 3.0L F68Z-9F715-DA 1995 Windstar 3.8L F68Z-9F715-EA 1996 Windstar 3.8L F68Z-9F715-CB 1995-96 Econoline/F-150-350 Series/Bronco 4.9L F68Z-9F715-EA 1996 Explorer 5.0L F67Z-9F715-BA

Nov 03, 2009 | 1996 Ford Explorer

1 Answer

1984 Crown Victoria dies frequently


A faulty MAF sensor could possibly be your issue. They can be chemically cleaned with CRC electrical spray cleaner.. It is located in the intake on top of the engine inthe ducting.. Do not use abything but crc, don't touch or try to rub it off.. It is a sensitive air flow sensor The CRC dries quickly. reinstall and see if you are good. :) Ned.

Sep 17, 2009 | 1984 Ford Crown Victoria

1 Answer

96 Crown Victoria runs rough when first started, idles smooth after a few minutes but has no acceleration before running for 20-30 minutes. Replaced the egr valve..little help, loses acceleration on the...


Ahhhh!, if only we could turn back the hands of time. Is the vehicle sending any signals like blue smoke through the exhaust, or using a lot of oil. Possibly running on after the ignition is turned off.These are all indications of high milage wear internally. Rings, bearings, etc.etc. Low oil pressure? Blinking oil light when at intersections. Any of the above?

Aug 24, 2009 | 1996 Ford Crown Victoria

1 Answer

Cleaned nozzles motor or pump is working, fluid is full but no fluid will come out windshield fluid nozzles. I just worked a couple of weeks ago. Whats wromng with it?


youve got a broken hose some where, i would pull the hoodliner off and check under there first. hope this helps and good luck

Jun 09, 2009 | 2001 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...