Question about Cars & Trucks

Open Question

Digidoor 2 Rattles and makes weird noises when opening or closing, but worse when opening. I can see the driving belt has a lot of play on it

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: serpintine belt making noise/ or belt tensioner

change serpintine belt I had one that it made noise changed belt noise went away

Posted on Mar 11, 2009

  • 5 Answers

SOURCE: Making buzzing noise when driving.

this could be the petrol pump

Posted on Apr 21, 2009

  • 391 Answers

SOURCE: Need to replace the timing belt on my 1994 Ford Escort

I suggest purchasing a repair manual and following the steps in there as there is too great a risk of someone putting it on here and forgetting a step that makes it even more difficult or expensive. The auto parts places will loan you the harmonic balancer puller you will need. I have done two on 94 Escorts and it's not too bad compared to others. I would strongly recommend replacing the crankshaft seal while you have the end of the crank exposed, replacing the seal is in the book too.

Posted on May 14, 2009

  • 1187 Answers

SOURCE: I have a 2006 Audi A4. Weird noise.

Could be a broken motor mount, so that one of the pulleys is scraping a shroud or some other fixed item.
Examine the area around the pulleys and see if there is bare metal below one of them.
If so, have the motor mounts checked.

Posted on Sep 28, 2009

Testimonial: "Thank you for your help."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My car is making a weird tapping noise... Help I don't know what to do my ex- bf tried to fix whatever was wrong and made it worse. The noise is coming from the back tire. Someone please help a girl out..

it could need a new tyre as the layers may have parted, it could be the wheel bearings , as you can see it could be a few things , does this tapping get louder,quicker the faster you drive or is it constant ? do the brakes feel and work ok ? do you know what your ex-bf actually did that made it worse, as that would be where the problem is coming from, just need to find the solution ,i know i've asked a lot but the more info i can get the better a chance i "can help a girl out ", keep me posted Carly and together we will get this sorted

Sep 29, 2014 | Cars & Trucks


Squeaking of belt noise

A use tip for all car owners. no specific model/make.

The Belt of the a/c to the solenoid pulley or the main belts can create a lot of squeaking noise.
Start the car to hear the noise now pour some water into the belt and the noise will subside off . You have the noise confirmed of a belt as sometimes it will trick you to think of water pump bearings, alternator bearings or even engine noises.
Stop the engine and check for play in the belt if so tighten the belt If not use some chalk power or candle wax to be rubbed into the belt that was making the noise - the a/c drive belt - or the main belts..
Now start and check . the nosie would be reduced or gone.
You can have the belts changed sooner or later.

on Aug 31, 2010 | Ford Fusion Cars & Trucks

1 Answer

Making rattling sound

does it get worse the faster you go? could be your lifters or valves ticking.

Feb 03, 2014 | Cadillac SRX Cars & Trucks

1 Answer

Weird Squealing Noise under the hood

Couple of thoughts -
1) a belt is slightly loose. not enough tension it could be slipping.
2) when you had the belts replaced, the new ones could have been over-tensioned, which could wear out a pulley bearing.

Jan 09, 2014 | 2006 Nissan Sentra

1 Answer

Door closer problem

Your description sounds like a sensor is malfunctioning. the close sensor needs to be slightly LESS sensitive, based on your "assistance" description.

Jan 28, 2012 | Cars & Trucks

1 Answer

I have a 2001 Isuzu Rodeo. When starting, it has a loud skreeching noise and when theres a load on it. I have replaced the belt, 2 idler pulleys, alternator, a dummy water pump pulley, and the ac. Still it...

Typically, the noise comes from the fact that the tension on the altenator belt is not enough. I recommend you tighten the belt by adjusting the tensioner screw by about (2) turns and test. Repeat it as necessary until the noise stops.

You'll usually hear the noise right at start up and it will continue for close to a minute until the idle of the car changes.

Jun 17, 2011 | 2001 Isuzu Rodeo

1 Answer

1995 wrangler front end rattles when i release clutch

Most likely the noise is the throwout bearing. If you have lots of miles on it you may consider doing the entire clutch while you're in there. If the pressure plate is in really good shape, you could just replace the disc, but if there are any hard spots on the plate it may chatter. Don't forget the pilot bearing in the back of the crank either.

Sep 30, 2009 | 2001 Jeep Wrangler

1 Answer

2002 chevrolet silverado 2 wheel drive that rattles when you drive down a bumpy road. It seems worse when you first take off in the morning, but after you drive it for a while the noise seems to not be as...

Personally, I would start looking at the exhaust system shields and hangers. Make sure they are secure and not too close to the exhaust components. Minimum clearance for the shields is 20mm ( roughly 3/4"). You might be able to get away with a little less, but move or bend to get additional clearance.
Also make sure the spare tire rigging is secure, always a culprit.
Let me know how it goes,

Feb 25, 2009 | 2002 Chevrolet Silverado 1500HD

1 Answer

Well my mitsubish galant makes the loudest noise when you turn it on I think it has to do with the bands. When the car is cold it sounds like a helicopter when it gets warmed up it quiets down but the...

Replace the belts when they are worn and or dry rotted they become brittle and slip. sound is much worse when vehicle is closed. I would also try shutting the A/C off also sometimes the compressor will make a lot of racket if the clutches are shot.

Nov 03, 2008 | Mitsubishi Galant Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides