Question about Cars & Trucks

Open Question

Where to locate indicator relay on mg zs - Cars & Trucks

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 275 Answers

SOURCE: lost transmission

Can you check to see the transmission oil. See the quality of the oil, if there is antifreeze/water in it. It is possible that the antifreeze has entered the transmission and caused the transmission failure.
This is likely to be a cause of the radiator. The transmission oil cooler lines pass through the radiator and sometimes fail, causing antifreeze to pass into the transmission oil cooler pipes and then into the transmission, causing faults.
If this is the case, then you will have to replace the radiator. Repair or replace the transmission.
Hope this helps

Posted on Feb 17, 2009

  • 373 Answers

SOURCE: my mg zs 180 keeps blowing a 15 amp fuse just as i

Take a hard look at the starter solenoid causing the problem. (Electrical short in solenoid). hope this will help you.

Posted on May 13, 2010

  • 1 Answer

SOURCE: i need timing marks for rover 75 mg zs 2.5 vg

Rover car timing mark

Posted on Jul 15, 2011

ivan_whisker
  • 1013 Answers

SOURCE: Brake lights don`t work on 2003 MG ZS

hi there is normally a small switch on most makes of cars on the back of the break pedal this is usually self adjusting but some times need doing again if its not this bulbs or a fuse hope this helps

Posted on Mar 21, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to service my mg zs


the best thing you can do if you want pictures on how to service the vehicle is to purchase a haynes or chiltons manuel for your vehicle. they have pictures diagrams and helpful hints. you can find them at auto parts dealers as well as ebay.

Feb 27, 2015 | 2003 MG ZT-T

1 Answer

Like to no the torque settings for a rover mg zs


engine power torque
or bolt torque spec?
for either , the FSM covers that , buy one, factory service manual.

Jul 14, 2014 | 2005 MG ZS

1 Answer

Mg zs 180 power steering noise


Check the fluid level of the steering pump, if level is ok, then pump may be faulty. The rack and pinion may be worn. I have seen a dirty install of new components cause this as dirt is allowed to enter the rack, clogging up passages.

Dec 14, 2013 | 1992 Honda Accord

1 Answer

Brake lights don`t work on 2003 MG ZS


hi there is normally a small switch on most makes of cars on the back of the break pedal this is usually self adjusting but some times need doing again if its not this bulbs or a fuse hope this helps

Mar 21, 2013 | Cars & Trucks

1 Answer

When i drive my mg zs 120 the heaters blow cold air is this a problem my thermostat could cause


if the coolnt level is ok try bleeding the system little 8mm bleed screw on coolant rail check the water valve is open and moves when the temp control is rotated i think your problem is the little valve located in the heaterhose at the back of the engine you will need a new hose

Mar 13, 2013 | MG ZS Cars & Trucks

1 Answer

Mgzs horn not working checked fuses


Own an MG Rover built after August 2003? Is one of the following not working:
Horn? Drivers electric window? Central Locking? Fog lights? Intermittent wipers?
It is very likely going to be one or several of the Pektron relays in the SCU unit that have gone. The relays are readily available for about £5 each on the web. It can all be fixed in under a day with some soldering tools, sockets, patience and perseverance.
Such a shame one small component, not even made by Rover, have just a detrimental effect on electrical reliability.
Here we fix a 2004 MG ZR but the Pektron relay are also used in the MG ZS, Rover 25 45 and MGF, so the general instructions are also applicable to them. Just the location of the SCU unit will vary.
On the MG ZR with a/c most garages will say the a/c has to be degassed etc (more cost) but here we leave the a/c connected. The SCU unit can just about be wiggled out from behind the a/c evaporator(radiator) unit with it still connected if some of the pipes clamps are loosened.
https://youtu.be/sQeFa5v5DXM

Or or search for youtube channel comeinhandynow


Feb 09, 2013 | Cars & Trucks

1 Answer

Zs mg rover fan heater risistor not working just not getting no electric feed to it and the fuse is ok.


A very common fault this one, that is easily fixed. On older cars the heater fan speeds one and two often fail, due to the resistors burning out. This applies to most of the MG Rover cars of the 90's and 2000's so Rover 200, 25, 45, 400, MG ZR, ZS, MGF and MGTF.
Buy three bigger resistors of value 0.68 ohm and wattage 10 watts, from eBay or an electronics store.
Most of the video here is an MG ZR, apart from the MG TF at the start but it is similar for all models. The MG TF took marginally longer due to the slightly more hidden location of the resistor pack. You need to remove a short vent pipe as well as the glovebox cover on that car.

Oct 09, 2011 | Cars & Trucks

2 Answers

I need timing marks for rover 75 mg zs 2.5 vg


If your changing the timing belt, this should help.

Jul 13, 2010 | 2002 Land Rover Freelander

1 Answer

My 03 celica ac indicator light flashes continuously. I was told by the dealer that I have a bad ac relay inside the dash and the dash would have to be disassembled to have it replace. Since most relays...


Hello. You have posted a great question here, one that other Celica owners may also have. The solutions is as follows:

You have a very common issue.

More than likely, you have a bad AC magnet clutch relay.

Toyota is aware of a high failure rate from these relays, and has issued a technical sevice bulletin regarding this.

You need to replace the AC relay, with the updated relay.
The old relay part number is: 90987-02022.
The updated relay's Toyota part number is: 90987-02028

Contrary to what your dealer is telling you, the relay is in the relay box under the hood. Look for the 'AC MG Clutch relay'.

Replace the relay, and you problem will be cured.

Dec 31, 2009 | 2003 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...