Question about 2007 Chrysler Town & Country LX New Cars
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem on my 07 and it turned out to be caused by the bulbs getting too hot and melting the surrounding plastic which opened the circuit powering them. I was able to fix the problem by removing the bulbs and cleaning the sockets allowing the bulbs to seat correctly. The lenses snap off to give you access to the bulbs. If you are not familiar with how interiors of cars come apart, I would not suggest doing it as you may crack the lens.
Posted on Oct 13, 2009
1. Pop off the triangular piece that is just cosmetic on the upper flat part of the mirror where it is attached to the van.
2. Under this piece are two visible bolts which you will need a Torx driver to remove.
3. Open the passenger door all the way open and remove the 3rd bolt, which is exposed from the outside of the car.
4. Expose the wiring harness plug by doing the following:
a. Pull off the door weatherstripping along the top of the door and on the pillar (the part of the car to the left of the windshield) Do not completely remove the weatherstip - simply pull it away enough to execute the next step.
b. Remove the plastic pillar cover: it simply snaps in. Pull hard and it will pop off
c. Lift up the plastic cover over the speaker on top of the dashboard. This piece goes all the way across the dashboard. Simply lift it up enough to get your hands underneath it. There is no need to free it from the passenger side.
d. Follow the mirror wiring harness around the rear of the speaker (the side nearest the engine) and unplug it from the female connector at the right-rear of the speaker. There may be a wire clip at the left-rear of the speaker that you will need to get the wire out of.
5. Unplug the wire, remove the mirror, replace the mirror, reinstall everything
hope its work
Posted on Jan 11, 2010
Memory selector is on driver's door, First set driver 1 seat and mirror positions, then press and release memory "s" button. then press and release memory selector "1" button. repeat for # 2 driver substituting memory selector 2 in step 2. hope this will help you
Posted on Jan 26, 2010
Testimonial: "Thanks so much . Your advice was spot on."
Tips for a great answer:
Jan 28, 2015 | Cars & Trucks
Feb 05, 2012 | 2000 Chrysler Town & Country
Apr 25, 2011 | 2007 Chrysler Town & Country LX New Cars
Jan 27, 2011 | 2005 Chrysler Town & Country
Jul 06, 2010 | 2007 Chrysler Town & Country LX New Cars
Jun 01, 2010 | 2006 Chrysler Town & Country
Jan 20, 2010 | 2007 Chrysler Town & Country LX New Cars
Oct 11, 2009 | 2007 Chrysler Town & Country LX New Cars
32 people viewed this question
Usually answered in minutes!