Question about Cars & Trucks

Open Question

NISSAN DISEL UD TRUCK MODEL:CWM272M COMMON

NISSAN DISEL UD TRUCK MODEL:CWM272M COMMON RAIL,ENGINE LIGHT SHOWING.ENGINE CRANKING BUT NOT START?

Posted by on

  • Jia Nissan
    Jia Nissan Jul 31, 2013

    IF I SMELL OCTANE EINGINE START.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cwbtat
  • 52 Answers

SOURCE: 98 ford explorer wont start theft light on while

It sounds like the vehicle is in theft mode,did you use a different key? Does the theft light blink really fast with the key off?If the passive anti-theft system has been activated the computer will have to be reset in order to get the vehicle running again.

Posted on Apr 26, 2009

boysor2933
  • 293 Answers

SOURCE: 95 maxima hard to start

Remove the high tension cable to the distributor from the ignition unit. Conduct a spark test. If there's no spark, try to replace the ignition coil or the igniter.

Posted on May 28, 2009

  • 2187 Answers

SOURCE: 2002 WG Jeep Grand Cherokee

The error P1130 and P1131 is for the fuel trim and lean fuel mixture respectively. This tells me that this may be an issue with the air fuel mixture or its reached its limits in compensating for the incorrect mixture. You could try to clean out the intake first using carb cleaner spray or tuner spray to clean out the intake and the MAF sensor which measures the air that comes in. Check also if there are leaks or gaps on the air duct found between the air filter and the intake manifold and the intake plenum. Leaks would cause the system to get an incorrect reading. If it were a faulty sensor you should get the error code for the sensor and you may have issues starting the engine up.

Check also the vacuum hoses which may be loose or cracked that needs replacing or refitting. This is also a common cause. I also do not rule out the possibility of the fuel sensors going or starting to go bad. The PCV may also need cleaning or replacing.

With all mentioned items go check first the leaks of the intake system and the vacuum lines as these are found to be common. Some leaks or cracks are minimal but is crucial to the sensors.

Posted on Jun 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a brake buzzer that goes off while driving a nissan ud 80 truck,seems like the air pump cannot keep up


if it has a belt driven air compressor check belt and tension
it could be a buzzer problem
it could be an air leak in the system ( possible in the park brake diaphragms )
install an air gauge in the drain plug of a tank and monitor the air pressure use
with the truck being driven normally then the tank pressure should not show much variation
test the brake system by tuning the engine off, hold and apply the foot brake and see if the pressure continues to diminish indicating a leak in the system or foot valve operation
finally take it back to nissan ud as it will be still under warranty

Aug 24, 2016 | 2012 Nissan NV

1 Answer

Setting valve clearence nissan ud RD8 V8


Jun, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
What is the correct valve clearance for Nissan UD truck

Jul 25, 2016 | Nissan Cars & Trucks

1 Answer

Nissan ud 440 clutch and gear selection is normal when truck is cold .The moment the truck is driven for a short distance system fails please assit


that model is fitted with a clutch servo .. start there
look for leaks and proper operation

problem with clutch pressure plate or clutch fork
oil on clutch



26226982-0pzx1d5ignqmvempyvkkkg2z-1-0.jpg

Jun 27, 2016 | Nissan Pickup Cars & Trucks

1 Answer

2003 Nissan frontier truck. Running fine change the oil, oil filter,gas filter and know it won't start. When it did it back fired twice. There's no check engine light what happened?


Changing the fuel filter releases the pressure on the lines and drains the system. You need to cycle the key several times to prime the fuel lines again or keep cranking the engine till fuel pressure gets to the proper spec.

Jul 13, 2015 | Nissan Cars & Trucks

2 Answers

What is the correct valve clearance for a Nissan UD truck ?


Write your answer...i whan look us valve clearence for adjust engine model RD8 V8

Jan 15, 2012 | Cars & Trucks

2 Answers

Lose of power and engine code po0088 comes on


Hello! Code P0088 is telling you the fuel rail pressure is to high...Most common reason is a plugged fuel filter...I would suggest, unless you have recently changed it, replacing the fuel filter first...If that does not clear the trouble I'll need the year, model and engine size to assess the problem further...

Guru............Saailer

Aug 23, 2011 | Ford F-250 Cars & Trucks

1 Answer

I have a Nissan Maxima QX 1996 model. Only in the morning (but the weather is already hot!) at the first time I tried the engine is not starting... Battery and starter motor is working for minutes and...


You migh have an Injector leak down problem, the fuel rail goes empty and while you keep cranking the fuel rail fills up building pressure and then the engine starts, this normally happens if the vehicle is parked for more then 3-4 hours.

Aug 11, 2011 | 1996 Nissan Maxima

2 Answers

Try to start truck but battery dies.


check your ground wires. its quite common that they rust off and then that causes a no start. check along the frame by the battery, and starter.

Apr 10, 2010 | 1997 Dodge Ram 1500 Club Cab

3 Answers

My 1990 nissan hard body d21 short bed truck wont start only if u add starter fluid


fuel pump and fuel sock is bad replace them but first replace the fuel filter, it's located driverside on the inside of frame rail under door.

Aug 14, 2009 | 1990 Nissan Hardbody King Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...