Question about Cars & Trucks

Open Question

1988 FORD LASER KE TX3 head gasket torque - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: need bolt torque and order for 1988 dodge heads

Torque for your bolts are 105 ft.lbs.

looking forward it would look like this for the order

7 3 1 5

8 4 2 6

Hope this helps you!!!!!

Don't forget to rate!

Posted on Mar 17, 2009

Ad
Service Dude
  • 201 Answers

SOURCE: is there a alternator the same as a ford laser tx3 turbo

Yes, just make sure that it looks the same, the ford and mazda most of the spares is the smame

Posted on May 13, 2009

  • 85 Answers

SOURCE: NEED FORD 2.2l head gaskets torque chart

Tighten the head bolts 29 to 32 ft lbs , then tighten again to 59 to 64 ft lbs

Posted on Apr 18, 2010

  • 104 Answers

SOURCE: remove and install water pump

You have to remove your belt ...fan ...and fan shroud then remove outer bolts off water pump housing take off replace with new water pump and GASKET, seal gasket with permatex before placing gasket in place then rebolt new water pump on and your golden.....make sure no dirt or debris gets in ...im glad i can help ...

Posted on May 25, 2011

emissionwiz
  • 76846 Answers

SOURCE: torque settings for head gasket on LDV convoy 400 2,5ltr ford engine

I can tell you one thing for sure these are torque to yield bolts and they must be replaced, you can't use them over or the head gasket will leak very quickly or the bolt will snap on install..

Posted on Jul 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I download a workshop service manual that works for a ford laser 89 ke tx3 turbo


the best place to get a proper manual for a vehicle of that age will from HAYNES

Aug 17, 2016 | Ford Cars & Trucks

1 Answer

Torque settings for head gasket on LDV convoy 400 2,5ltr ford engine


I can tell you one thing for sure these are torque to yield bolts and they must be replaced, you can't use them over or the head gasket will leak very quickly or the bolt will snap on install..

Jul 13, 2012 | Cars & Trucks

1 Answer

Remove and install water pump on 1988 ford ke laser


You have to remove your belt ...fan ...and fan shroud then remove outer bolts off water pump housing take off replace with new water pump and GASKET, seal gasket with permatex before placing gasket in place then rebolt new water pump on and your golden.....make sure no dirt or debris gets in ...im glad i can help ...

May 25, 2011 | Ford Laser Cars & Trucks

2 Answers

1988 Ford Ranger blown head gasket suspected, Water in oil does this sound correct 2.9 Liter V6


YEP IF YOU SEE WATER OR ANTIFREEZE IN CRANK CASE YOU HAVE A BLOWN HEAD GASKET.

Nov 20, 2010 | 1988 Ford Ranger

2 Answers

NEED FORD 2.2l head gaskets torque chart


Tighten the head bolts 29 to 32 ft lbs , then tighten again to 59 to 64 ft lbs

Apr 17, 2010 | 1989 Ford Probe

2 Answers

Have changed head gasket etc. as thought was that but on start up to flush engine water was pouring straight out sum. nothing looked wrong in head gasket or intake gasket areas.


where is the watter coming out from? did you follow torque sequence / did you have head resurfaced? check block / did you find any thing wrong with the old head gasket? please give more info, so we can give you better assistance , Thank you for using Fixya.

Apr 10, 2010 | 1988 Subaru Justy

1 Answer

I have 4.9L6 need torque specs for cylinder head


for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.


e023442.jpg

Dec 05, 2009 | 1988 Ford F 150

1 Answer

Specs on torquing head bolts on 1988 pontiac lemans aka daewoo lemans aka passport optima. also do i need gasket sealer anywhere or gaskets only when doing a head job on this car?


firstly tighten in sequence to 20Nm all round, then tighten to 30Nm all round,then tighten 90 degrees all round, and finally tighten a further 90 degrees all round. if you taken head off you should replace gasket or just use gasket sealer if you cant replace, just replace the head bolts, dont reuse or they may break

Jul 24, 2009 | 1988 Pontiac LeMans

1 Answer

Is there a alternator the same as a ford laser tx3 turbo


Yes, just make sure that it looks the same, the ford and mazda most of the spares is the smame

May 13, 2009 | 1989 Mazda 323

1 Answer

Need bolt torque and order for 1988 dodge heads


Torque for your bolts are 105 ft.lbs.

looking forward it would look like this for the order

7 3 1 5

8 4 2 6

Hope this helps you!!!!!

Don't forget to rate!

Mar 17, 2009 | 1988 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...