Question about Ford Cars & Trucks

Open Question

2005 ford ranger 2.5tdi cam belt diagram - Ford Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: need a serpentine belt diagram for 2005 ford focus

You should have that diagram on the inside of your hood or on the fan shroud. Good luck

Posted on Apr 08, 2009

Ad
localwonder
  • 6784 Answers

SOURCE: 2004 ford ranger edge 3.0L spark plug wire diagram

The diagram you seek is below.


374d96b.jpg

Posted on Jul 26, 2009

john631068
  • 172 Answers

SOURCE: Timing marks on 1999 Ford Ranger 2.5L.

Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

  1. Loosen the alternator retaining bolts and remove the drive belt from the pulleys. Remove the water pump pulley.
  2. Loosen and position the power steering pump mounting bracket and position it aside.
  3. Remove the four timing belt outer cover retaining bolts and remove the cover. Remove the crankshaft pulley and belt guide.
  4. Loosen the belt tensioner pulley assembly, then position a camshaft belt adjuster tool (T74P-6254-A or equivalent) on the tension spring rollpin and retract the belt tensioner away from the timing belt. Tighten the adjustment bolt to lock the tensioner in the retracted position.
  5. Remove the timing belt.

To install:
  1. Install the new belt over the crankshaft sprocket and then counterclockwise over the auxiliary and camshaft sprockets, making sure the lugs on the belt properly engage the sprocket teeth on the pulleys. Be careful not to rotate the pulleys when installing the belt.
  2. Release the timing belt tensioner pulley, allowing the tensioner to take up the belt slack. If the spring does not have enough tension to move the roller against the belt (belt hangs loose), it might be necessary to manually push the roller against the belt and tighten the bolt.

The spring cannot be used to set belt tension; a wrench must be used on the tensioner assembly.
  1. Rotate the crankshaft two complete turns by hand (in the normal direction of rotation) to remove the slack from the belt, then tighten the tensioner adjustment and pivot bolts to specifications. Refer to the necessary illustrations. Make sure the belt is seated properly on the pulleys and that the timing marks are still in alignment when No. 1 cylinder is again at TDC/compression.
  2. Install the crankshaft pulley and belt guide.
  3. Install the timing belt cover.
  4. Install the water pump pulley and fan blades. Install upper radiator hose if necessary. Refill the cooling system.
  5. Position the alternator and drive belts, then adjust and tighten it to specifications.
  6. Start the engine and check the ignition timing. Adjust the timing, if necessary.

Posted on Nov 25, 2009

  • 1757 Answers

SOURCE: need wiring diagram for spark plugs for 2005 ford

I do not know if you have the 3.0L or 4.0L Engine, regardless they have the same diagrams.

For the 3.0L AND 4.0L:
Firing Order:
1-4-2-5-3-6
Cylinders:
(back of engine)
3-------------6
2-------------5
1-------------4
(back of engine)
Ignition Coil:
(back)
3...4
2...6
1...5
(front)

Let me know if this helped...

Posted on Mar 16, 2010

emissionwiz
  • 76164 Answers

SOURCE: firing order diagram for 2005 ford ranger v-6

here is the diagram, just matche the colours


790ffc5.gifPlease rate my help, thanks for using fixya

Posted on Sep 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cam belt has gone on ford ranger thunder 2008 2.5 diesel is it a non interference engine


THE 2.5 IS A NON-INTERFERANCE ENGINE. Replace the belt, the water pump and all t-belt idlers and tensioner pulley

Jun 20, 2016 | 2008 Ford Ranger 2WD

1 Answer

When a have a have duty trailer with an car loaded, my Ford Ranger MY2003 2,5TDI have no power up hill and degrease the speed fromm 80km/h down to 40-50km/h and have to change gear to 3:e and max trottle...


Did you ever think that a car and heavy duty trailer might be too much of a load for a Ranger? That sounds like it would be alot for a 1/2ton truck, let alone a little Ranger.

Aug 12, 2014 | Cars & Trucks

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, Then look for an arrow or a mark on the cam shaft pully and another mark on the block. Line those up. Put the belt on, make sure the marks did not move.

Feb 12, 2013 | Cars & Trucks

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, look for a mark on the cam pulley and a mark on the head, line those marks up and put on the belt

Feb 12, 2013 | Cars & Trucks

1 Answer

Engine Timing marks on a 4.0 ford ranger on a 2005


Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

Nov 02, 2011 | 2005 Ford Ranger

1 Answer

Fan belt diagram


I was looking for diagram for the serpentine belt for a1991 ford ranger
extra cab,four wheel drive, 4.0 liter engine but found out I had the wrong size belt. thank you anyway

Oct 20, 2009 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...