Question about 2004 Toyota Sienna

Open Question

2007 toyota sienna sliding door not working automatically

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: The sliding door handles of my 1998 Toyota Sienna have both broken.

I replaced both of my sliding door handles this weekend. It was actually pretty easy. Cheapest I could find the handles was a little over $70 each. The interior panel is held on with one screw and 10 nylon clips. The one screw is in the cup holder. Put you hand in the cup holder and push out at the bottom. It pops right off exposing the one screw. I started on the clips from the top at a corner. Seemed to be the easiest place to slide a screw driver under. Once I got the screw driver in, I started working my fingers under the panel. The clips run mostly along the top and bottom about 6 inches from the edge. I made an effort to apply the force as close to the clips as I could to reduce flexing the panel. Once I got the first clip to pop out the other followed pretty easy and the panel lifted right off. Carefully peel back the plastic barrier. The exterior handle is held on with two 10mm bolts. Connecting the short cable was pretty obvious once you could see everything. Now I have to teach everyone to open the side doors very gently! Hope this helps.

Posted on Mar 09, 2009

Ad
  • 1861 Answers

SOURCE: 2005 Toyota Sienna sliding door problem

You have a sticking fuel door lock-device. Look to see if the tab is in the down position.

Posted on Jun 09, 2009

  • 154 Answers

SOURCE: could not open driver side manual sliding door in my 2003 Sienna

need to remove inner panel.. be careful not to break panel... ck latch seems broken.. o

Posted on Aug 04, 2009

  • 62 Answers

SOURCE: The sliding door handle on my 1999 Toyota Sienna broke

take off the door panel and unscrew it.

Posted on Dec 29, 2009

  • 1 Answer

SOURCE: toyota sienna interior lights not working

The problem is in the sunvisor light. You will have to take the light assembly off and you will find wires have become disconnected.

Daviscacare.com
757-689-4701

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix 2007 toyota sienna 2007 sliding door


Your question is too vague about the "problem". Is it alignment, latching, locking, handle, etc.? Try looking at the following links:
https://www.facebook.com/Toyota-Sienna-Faulty-Power-Sliding-Doors-233250320033754/
or http://www.siennachat.com/forum/66-problems-maintenance-repair/1300-sienna-power-sliding-door-problems-thread.html
hopefully you will find a solution there.

Mar 27, 2016 | 2007 Toyota Sienna XLE

1 Answer

My automatic slide side door does not work


You probably have a bad cable. Call Toyota, they had a "customer satisfaction" recall for this problem.

Mar 21, 2014 | 2005 Toyota Sienna LE

1 Answer

Toyota seinna 2006 passenger side automatic sliding door regulator


i got problem with my sliding door toyota seinna 2006, when i push control button from inside, the door can not move and stuck, if i use with hand to pull the handle it is working, it is mean from out side. can you tell me the solution, thank you.

Apr 23, 2012 | 2006 Toyota Sienna

1 Answer

Our back door on our 2007 Toyota Sienna will not stay closed. It will open automatically when we hit the remote. It will go all the up, then it comes right back down.


There was a safety bulletin by Toyota regarding the lift gate of the 2007 Sienna. I had to jump into the cargo area once to avoid being crushed by the lift gate coming down unwantedly.
Contact your dealership..they replaced the lift gate hydralics (under warranty at the time) and the problem was solved.

Aug 20, 2010 | 2007 Toyota Sienna

1 Answer

Were can i find a wiring diagram for toyota sienna sliding power door


toyota sienna 2002 automatic door is not working when i wash it in carwash,i`m engr what can i do

Mar 13, 2010 | 2002 Toyota Sienna

1 Answer

2000 Toyota Sienna Sliding Door Latches Stick - Safety Hazard


clean and lubricate door sliding mechanism and locks with silicone spray lubricant, clean all door seals and jambs 

Oct 09, 2009 | 2000 Toyota Sienna

3 Answers

2005 Toyota Sienna XLE - Automatic sliding door not closing.


This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however:
You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.

Aug 23, 2009 | 2004 Toyota Sienna

1 Answer

Automatic sliding door on 2004 sienna is broken (cable snapped)


I'm dealing with a similar problem.... I don't have good news for you - Toyota only sells that cable as part of an assembly (just got my estimate today to replace it $2000) thats not a typo. I removed the cable and disabled the power door function - Now it works as a manual door just fine.

These are photos of what I found in my door - I'll have more pics posted soon as to what I did to make the door work soon.

http://s797.photobucket.com/albums/yy256/krtnheaz/Sienna%20Rear%20Passenger%20door/

Aug 19, 2009 | 2004 Toyota Sienna

Not finding what you are looking for?
2004 Toyota Sienna Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...