Question about 2003 Chevrolet Impala

1 Answer

Motor turn over but want start - 2003 Chevrolet Impala

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers

Check to see the security lamp or message displayed while the engine is cranking over. The next things you will need to check for is spark and fuel pressure. To check spark you will need to remove one of the spark plug wires from the spark plugs and insert a small screw driver into the boot where the plug was and then lie the screw driver near a metal portion of the engine. Next you will need to have someone crank the engine over while you watch for a spark from the screwdriver. Make sure you are not touching the screwdriver while the engine is cranking, or you will get quite the shock. If you have spark then you will need to check for fuel pressure with a fuel pressure gauge.

Posted on Jul 31, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crankshaft wont turn but motor start up battery and brake light on battery light on


something is wrong in your statement
crankshaft won't turn but the motor starts
if the crankshaft won't turn then there is no way that the motor will start--physical impossibility--
ask you question again and include make , model, year type of machinery and list clearly what was done and what you are experiencing as problems

Feb 02, 2016 | Cars & Trucks

Tip

Starter Motor stuck? try this simple trick...not just for bmw's but all cars


you can try a simple trick , get a friend to turn the ignition on as if to start the motor, with a small hammer or long bar, tap the starter motor this should release the solenoid and the vehicle should turn over, make sure you are not near any moving parts when it does start, if then you turn the motor off, and try to start it again with the key as normal and it does not start, but will start with hitting it again, you need a new or reconditioned starter motor as this one is worn and needs replacing..........NOT JUST FOR BMW'S, ALL CARS

on Oct 11, 2010 | BMW 525 Cars & Trucks

1 Answer

2007 f-150 shuts off after driving 2 miles. then will not turn over. hard to jump start.


is the motor overheating? does it have oil?, does it make any noise?

Dec 15, 2014 | Cars & Trucks

1 Answer

Motor brushes appear to be bad. How do I replace?


IF it is a capacitor start it will not have brushes but a start or a start run capacitor. If it has a start capacitor the in the back of the motor there will be a governor operated switch that you would hear click as the motor starts to run. If it is a start /run capacitor the it is in the circuit all the time . Pull the capacitor out and check it externally and you will probably find that it has exploded and there is gunk leaking out of the case . Go to a motor rewinding place and they will have the correct capacitor for the motor.. Take it as a sample.

Apr 02, 2014 | Cars & Trucks

1 Answer

No electrica power to motor turn switch but motor


look for signall to the starter you should have a power frome the battery and a smaller wire that you should get 12 volts when the key is turned to the start posion start there

Jun 28, 2013 | Cars & Trucks

1 Answer

When connecting negative cable it sparks and starts a blower on top of the motor, and the motor won't turn over, what do I have?


Steve: Tell me what engine is in the Max? Can you identify the "motor" you mention...by physical location on the engine?...Lastly, when you turn the key are you saying the starter motor does not run?...Guru...saailer

Dec 18, 2011 | 1992 Mitsubishi Mighty Max

1 Answer

Try to turn the ruck on and it just clicks once on the starter solenoid, what should i do?


hi you can try a simple trick , get a friend to turn the ignition on as if to start the motor, with a small hammer or long bar, tap the starter motor this should release the solenoid and the vehicle should turn over, make sure you are not near any moving parts when it does start, if then you turn the motor off, and try to start it again with the key as normal and it does not start, but will start with hitting it again, you need a new or reconditioned starter motor as this one is worn and needs replacing...hope this helps

Oct 11, 2010 | Ford F-150 Cars & Trucks

1 Answer

Will not start. When key is turned to start


hi..
exactly the starter motor is not activated so
1. try checking the connection to the motor and terminal of the motor
2.check the battery terminals are properly secured if any loose conncetion are there they wont work properly
3.check the continuity of the wire which is going to the motor

Jul 09, 2010 | 2000 Nissan Maxima

Not finding what you are looking for?
2003 Chevrolet Impala Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...