Question about 2007 Chrysler Sebring Sedan

Open Question

Code p1775 code. solenoid switch 6 speed auto trans. does gearbox have to be disassembled to replace

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2428 Answers

SOURCE: ok i have a 2001

These are all transmission codes there located insde the trany under oil pan Probably olny one one of them in stuck or bad But you realy should have this done at a transmissoin shop and also have them change filters do a complete service on it to there becase when they go there not cheap to rebuild

Posted on Nov 16, 2010

ginko
  • 19396 Answers

SOURCE: My 2000 Town & Country bucks terribly under

Hi.

Please click here and read the article I posted about P1775, P0700 and P0305 are consequence of the first code.

Regards.

Ginko.

Posted on May 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help asap 2003 Expedition code p0171 and code p0712 i have and idea of the 1st code but whats the secound code i really need help i dont want to take it to a shop where there going to charge me alot...


P0700 Transmission Control System

P0701 Transmission Control System Range/Performance

P0702 Transmission Control System -Electrical

P0703 Torque Converter/Brake Switch B Circuit

P0704 Clutch Pedal Position Switch -Circuit Malfunction

P0705 Transmission Range Sensor/Switch Circuit Malfunction (PRNDL Input)

P0706 Transmission Range Sensor/Switch Circuit Range/Performance

P0707 Transmission Range Sensor/Switch Circuit Low Input

P0708 Transmission Range Sensor/Switch Circuit High Input

P0709 Transmission Range Sensor/Switch Circuit intermittent

P0710 Transmission Fluid Temperature Sensor Circuit

P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance

P0712 Transmission Fluid Temperature Sensor Circuit Low Input

P0713 Transmission Fluid Temperature Sensor Circuit High Input

P0714 Transmission Fluid Temperature Sensor Circuit Intermittent

P0715 Input/Turbine Speed Sensor Circuit

P0716 input/Turbine Speed Sensor Circuit Range/Performance

P0717 Input/Turbine Speed Sensor Circuit No Signal

P0718 Input/Turbine Speed Sensor Circuit Intermittent

P0719 Torque Converter/Brake Switch B Circuit Low

P0720 Output Shaft Speed Sensor Circuit

P0721 Output Shaft Speed Sensor Circuit Range/Performance

P0722 Output Shaft Speed Sensor Circuit No Signal

P0723 Output Shaft Speed Sensor Circuit Intermittent

P0724 Torque Converter/Brake Switch B Circuit High

P0725 Engine RPM Input Circuit

P0726 Engine RPM Input Circuit Range/Performance

P0727 Engine RPM Input Circuit No Signal

P0728 Engine RPM Input Circuit Intermittent

P0729 Gear 6 Incorrect Ratio

P0730 Incorrect Gear Ratio

P0731 Gear 1 Incorrect Ratio

P0732 Gear 2 Incorrect Ratio

P0733 Gear 3 Incorrect Ratio

P0734 Gear 4 Incorrect Ratio

P0735 Gear 5 Incorrect Ratio

P0736 Reverse Incorrect Ratio

P0737 TCM Engine Speed Output Circuit

P0738 TCM Engine Speed Output Circuit Low

P0739 TCM Engine Speed Output Circuit High

P0740 Torque Converter Clutch Solenoid Circuit

P0741 Torque Converter Clutch Solenoid Circuit Performance or Stuck Off

P0742 Torque Converter Clutch Solenoid Circuit Stuck On
P0743 Torque Converter Clutch Solenoid Circuit Electrical
Now i dont know a lot about automatics especially modern ones with all this fancy electronics thats used nowdays but i think its a fault with the temperature sensor for the gearbox.But where its located and what it looks like i have no idea it could even be mounted inside the gearbox .Sorry not a very good answer from a mechanic but?? very few of our europeon cars come with auto transmission .Evan when i do know whats wrong i cannot buy the parts for the gearbox as only re-con boxes supplied by the dealer so best advice is to try a specialist in auto box repairs only .PS some of my best students when i used to teach mechanics many moons ago were the girls so no excuses like iam only a girl please

Apr 22, 2013 | Cars & Trucks

Tip

I get code P1775 and P0700


Hi.

P1775 is the most relevant code. It means Solenoid valve latched in torque convertor.

P0700 is consequence of the P1775 code. P0700 means that there is an additional code stored in the TCM (transmission control module). The TCM stored code is probably related to the same problem. TCM codes can be pulled out at the car dealer or at an authorized garage. On this see: I get code p0700 after an OBDII scan.

P1775 is often coming with misfire codes.

P1775 means that the TCM detects that the solenoid valve located in the valve body (inside transmission pan under the filter) is not in the expected position (valve has two positions LR and TCC).
This cause rough shifting and driving problems.

Sometimes it is possible fixing the problem by resetting TCM and ECU. This is done disconneting battery cable (ensure you have anti-theft code if needed).

However, if a P1775 occurred, that means that there had been a solenoid valve malfunction, and problem must be fixed.

The first thing to do is replacing transmission fluid, and if needed also the filter. If the fluid level is poor, or if fluid is dark brown and satured with metal particles, that can cause solenoid valve malfunction.

If replacing the fluid does not help, then the most common problem causing the P1775 code is a defective solenoid in the solenoid pack.

Transmission shift solenoids are located in valve body, and they can be tested reading Ohms with a multimeter.

If that does not fix the problem (usually it does), the mechanic will proceed testing wiring to solenoid pack, TCM and solenoid valve, to find the reason of malfunction. Most common problems causing P1775 are related to tranny fluid and solenoid pack.

On automatic transmission problems see also: My car does not shift..

Ginko.

on Aug 17, 2010 | Chrysler Town and Country Cars & Trucks

1 Answer

I have a p1775 and p0700 code what do i need to do to fex this


http://www.obd-codes.com/p0700

The P1775 has to do with the solenoid switch valve in the valve body sticking.

Apr 05, 2012 | 2002 Dodge Caravan

3 Answers

What does these codes mean P1781, P0731, P1784 AND P0700 AND HOW DO I FIX THEM.


p1781 is manufacturer control transmission, p0731 is gear 1 ratio incorrect, p1784 is manufacturer control transmission, p0700 is trans, control system malfunction. all of these codes refer to tranny.This code normally points to a faulty transmission control module, but this is an expensive part and you should have an experienced Dodge technician diagnose the problem first. or a transmission specialist. the other codes are probably associated with the p0700 code. have a good day !

Apr 27, 2011 | 2001 Dodge Grand Caravan

1 Answer

Trouble code p1784 on dodge grand caravan


found this on another page.....
Originally Posted by vasau viewpost.gif The vehicle came in with 2 trouble codes and complaint on a transmission shifting.
P1775 Solenoid Switch Valve Stuck in TCC.
P1784 LR Pressure Switch Circuit.
After clearing these 2 codes the van ran normal for about 20 minutes without any issue, but after, the problems came back with no codes.
LR Pressure Switch is always in "Open" position. Must be closed at Park, Rev and Neutral.
Could anyone explain to me how the switch works. Is this the solenoid pack or the LR Pressure issue?The L/R pressure switch should be closed in P/N only. The switch should open when put into REV if the trans is not in limp-in mode. All switches will stay CLOSED if the trans is in limp-in mode. Disconnect the trans 8-way connector at the solenoid pack. Key on scanner hooked up apply 12 volts to the L/R pressure switch pin in the 8-way connector and watch for the switch to change from open to closed. If it does change the SSV may be stuck in the TCC position. You will have to remove the valvebody and inspect the solenoid switch valve to know for sure. The pressure switch itself is in the solenoid pack. If you have an old solenoid pack changing it is easier and quicker than inspecting the valvebody. Perform your diag for fault P1784. I believe the pressure switch is also closed in 1st gear also. Hope this helps.

Jan 17, 2011 | 1996 Plymouth Grand Voyager

1 Answer

I have a doge gran carvan 2000 or 2001 3.3v6 i have cods coming up as falows p1775 p0732 p1788 p0700 p0456 can eny buty tell me wher to start got it today at an auction dont know much


CODE P1775 - A / T OR AUTOMATIC TRANSMISSION SWITCH LATCHED IN TCC POSITION. CODE PO732 - A / T ADDITIONAL GEAR RATIO ERROR IN SECOND GEAR. CODE PO700 - AUTOMATIC TRANSMISSION CONTROL SYSTEM MALFUNCTION CODE PO456 - EVAP SYSTEM SMALL LEAK DETECTED.POSSIBLE CAUSE FUEL TANK CAP LOOSE OR DAMAGED , SMALL LEAK PRESENT SOMEWHERE IN EVAP SYSTEM. I DID NOT SEE CODE P1788. BUT CODES P1775, P0732 , PO700 , YOU HAVE INTERNAL TRANSMISSION PROBLEMS TRANSMISSION SHOP HAS TO HOOK DIAGNOSTIC EQUIPMENT TO CHECK TRANSMISSION PRESSURE SOLENOIDS AND SHIFT SOLENOIDS. TRANSMISSION VALVE BODY HAS MANY SOLENOIDS PRESSURE SWITCH AND SENSORS COST TOO MUCH REPLACE THEM ALL LET GARAGE SCANNED TRANSMISSION BE MUCH CHEAPER.

Nov 07, 2010 | Dodge Caravan Cars & Trucks

2 Answers

200 Dodge Caravan 3.3L Engine. I am getting code P1775 & P1776. The car down shift and RPM goes up. The gear gets stuck on 2nd or 3rd shift. Check engine light comes on but after awhile it turns off. I...


r u using the rite fluid-chrysler calls for ATF 4 or u get problems-is the level correct--cars today use solenoids n electric governors to shift--pump may hav issue also--be careful with tran shops theyre the king of shade-Im wonderin if they really rebuilt it-investigate and maybe contact attorney general in ur state--here in fla itz an epedemic

Nov 03, 2010 | Dodge Caravan Cars & Trucks

1 Answer

Chrysler Neon auto gearbox problems


P0733 IS GEAR RATIO ERROR IN 3RD AND P0734 IS GEAR RATIO ERROR IN 4TH..THESE CODES USUALLY MEAN AN INTERNAL PROBLEM IN TRANSMISSION,BUT CHECK WIRES AT SPEED SENSOR CONNECTORS FOR BROKEN WIRES BY PULLING ON WIRES AND WIRING NEAR SOLENOID PACK FOR CHAFING..I HOPE THIS HELPS..YOU MIGHT WANT TO DROP THE TRANS PAN AND LOOK FOR A PLUGGED FILTER OR DEBRIS IN PAN..MAKE SURE THE TRANS COOLER IN RAD HAS NOT FAILED ALSO

Aug 14, 2009 | Chrysler Neon Cars & Trucks

1 Answer

Trouble codes on a 2000 Chrysler town and country


0775 is Presure Control Solenoid "B", 0784 is 4-5 Shift these are trans codes from the transmission Solenoid. This is a changable part for any mech. Part is around $200 & includes the gasket.

Jun 26, 2009 | 2000 Chrysler Town & Country

1 Answer

Tick over problem


Sounds like it could be a bad EGR valve, the trans fault codes of p1775 is nothing really, it could even be the fact that you are putting the car in gear at 3,000 revs.
If this is an intermittant problem then it goes right back to the egr valve. They clog and stick and will cause bad/rough idle issues especially on start up and also will cause spiratic idle problems.
JPTCAT

Jan 28, 2009 | 1995 Jaguar XJ6

Not finding what you are looking for?
2007 Chrysler Sebring Sedan Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...