Question about 2002 Isuzu Axiom

Open Question

Shift solenoid po 756 - 2002 Isuzu Axiom

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are codes PO300, PO332, and PO756


P0300=Random/Multiple Cylinder Misfire Detected
P0332=Knock Sensor 2 Circuit Low Input (Bank 2)
P0756=Shift Solenoid B CKT Performance Or, Stuck Off

Get that sick puppy to a good, retired GM guy. NOT a dealership, Marie. Best of luck to ya, sweetie.

Feb 14, 2015 | 2005 Chevrolet Silverado 1500 2WD

1 Answer

P0756 code Honda accord 2005


P0756all p07 codes are tranny.


  • Shift Solenoid 'B' Stuck Off (read the FSM page on 756 it tells you how to do the checks )

  • if 756 is cleared. (reset it using the scan tool, drive 20 miles, still set?)?

    if you get them clear, all DTCs
    do the tranny stall test. stated n the FSM.
    stall the torque converter. in 1st gear, parked.
    if rpm is too low the engine has power issues
    if Rpm is way too high (slip?) bad tranny. (or wires to it)

    Sep 17, 2013 | 2004 Honda Accord

    1 Answer

    Po 756


    Possible causes of OBD code P0756
    - Low transmission fluid level - Dirty transmission fluid - Faulty shift solenoid B valve - Shift solenoid B valve harness or connectors - Shift solenoid B valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0756 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off hope this helps

    Jul 26, 2013 | 2004 Volvo XC90

    1 Answer

    What are these codes in toyota rav 4 PO171 PO105 PO760 PO 770 PO130 PO171


    OBD=11
    code p0171 refers to system to lean---causes ---intake/ exhaust leak---air system---MAF/VAF sensor---fuel pressure/ pump---injectors HO2s
    code po105 refers to manifold absolute pressure (MAP) sensor/bar ometric sensor and circuit malfunction causes---wiring---MAP sensor ECM
    code p0760 refers to shift solenoid--circuit malfunction causes--shift solenoid---ECM?TCM
    code po770 again refers to shift solenoid.
    code p0171 again refers to shift solenoid ---performance or stuck off.
    code po130 refers to heated oxygen sensor HOS2 1 bank 1-circuit and have the rest checked .malfunction -- causes---heating inoperative---poor connection---wiring--- HO2S. So replace the shift solenoid and oxygen sensor

    Apr 22, 2013 | 1996 Toyota RAV4

    2 Answers

    What are the automatic transmission problem codes PO 751, PO 761, PO 734 indicate


    PO 734 GEAR 4 INCORRECT RATIO
    PO 751 SHIFT SOLENOID A PERF OR STUCK OFF
    PO 761 SHIFT SOLENOID C PERF OR STUCK OFF

    Jul 05, 2011 | Ford Focus Cars & Trucks

    1 Answer

    How to fix this codes po443,po730,po751,po756,pib11,c1243


    po 443= purge solenoid circuit
    po 730= incorrect gear ratio, transmission problem
    po 751= 1/2 solenoid problem
    po 756= 2/3 solenoid problem
    other 2 have no listing on alldata
    you should seek professional help with these trans codes.
    check ALL fuses first

    May 28, 2011 | 1999 Oldsmobile Silhouette

    1 Answer

    MY CAR WAS PUT ON A MACHINE AND IT CAME BAC THE FOLLOWING CODES: PO 301, PO304, PO335, AND PO 750. I DONT KNOW WHAT TO DO MY MECHANIC SAYS THAT THE SHIFT SOLENOID IS LOCATED IN MY TRANSMISSION AND HE...


    hi p -codes are as follows po 301 cylinder 1 missfire detected
    po 304 cylinder 4 missfire detected
    po 335 crankshaft position sensor A circuit malfunctio
    po 750 shift solenoid A malfunction

    Feb 23, 2011 | Hyundai Sonata Cars & Trucks

    1 Answer

    I have a 99 dodge dakota w the codes po 753 and po 720


    Just ask for the 3,4 shift solenoid, in which case the transmission pan has to be taken off, the filter, and possibly the valve body to get at the solenoid, I don't have my manual right now, so I can't tell you which solenoid it is.
    The speed sensor is usually screwed into the side of the tranny near the back end of it, don't confuse it with the back up light switch, that's screwed in somewhere in the center of the tranny. Hope this helped a little. Good Luck.

    Oct 18, 2009 | 1999 Dodge Dakota

    1 Answer

    P0740, p0753, p0758, p0785, p1860 all of them lit up on me


    PO740 IS TCC SOLENOID CIRCUIT MALFUNCTION CONDITIONS.CHECK TRANSMISSION FUSE - PO753 IS A/T 1-2 SHIFT SOLENOID CIRCUIT MALFUNCTION CONDITIONS.THE 1-2 SHIFT SOLENOID HAS FAILED - PO 758 IS A/T 2 -3 SHIFT SOLENOID CIRCUIT CONDITIONS. CHECK THE ERLS FUSE - PO1860 IS TCM PWM SOLENOID CIRCUIT MALFUNCTION CONDITIONS.CHECK TRANSMISSION FUSE+ IGNITION FUSE.

    Aug 02, 2009 | 2002 Dodge Ram Maxi

    Not finding what you are looking for?
    2002 Isuzu Axiom Logo

    Related Topics:

    94 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Isuzu Experts

    yadayada
    yadayada

    Level 3 Expert

    75744 Answers

    Steve Hurc
    Steve Hurc

    Level 3 Expert

    450 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Are you an Isuzu Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...