Question about 1996 Toyota Previa

Open Question

How to replace previa rear expansion valve - 1996 Toyota Previa

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: Replace the A/C exansion valve

i am not really sure on this but try these websites fix & troubleshoot heating & A/C its www.automedia.com and the other one is car A/c repair www.directgardening.com if you have a autozone near you there you can rent the special tools you will need take them back and get your money back try www.autozone.com

Posted on May 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove rear A/C expansion valve on 2001 Chrysler Town and Country


Next remove the rear seats or stow them. Then remove all the trim panels from the passenger rear of the vehicle. You will then be able to see the rear HVAC assembly.

Jack up the vehicle and support it properly. remove the nut that holds the rear lines to the expansion block.

Remove the heater core form the HVAC module with the cooling lines still attatched. Remove the HVAC module from the vehicle.

You will then be able to replace the rear evap core/tubes/expansion valve.

Get the kit from the dodge dealer. It will make life very easy.

Aug 13, 2015 | 2001 Chrysler Town & Country

2 Answers

Where is the expansion valve located on the 2004 KIA Sedona


Kia Sedona expansion FRONT valve located under dash, behind glove box, fan and coil. Evacuate freon first. Disconnect Freon lines from firewall., Lay right front seat back to flat horizontal position and lay on top or totally remove the seat for easier working access. Remove under dash cover, fan, glove box, coil housing, remove coil mounting bolts, remove old expansion valve. (Inspect old valve, if debris inside, blow out coil before installing new valve. If visible debris best to consider replacing REAR expansion valve and DRIER/FILTER in front of radiator too and blow out all lines and coils while servicing.) Use compressor oil to lubricate "O" rings on new FRONT or REAR expansion valve, install valve bolts, reinstall coil bolts to FRONT firewall or REAR frame, reconnect freon lines to firewall in engine compartment. Evacuate AC system, install freon (35 1/2 ounces, nominal 3 pounds), check system for leaks, check for proper operation, enjoy.

Sep 12, 2012 | 2004 Kia Sedona

1 Answer

Trying to replace a rear ac expansion valve for a 2000 dodge durango 4.7 but dont know exactly were it is. Or how to get replace it


Hi,
The expansion valve is located in the evaporator core, it is a brass made metal w/ temperature sensor tubing. Getting that expansion valve requires you to pull down the entire rear A/C blower box.
Am just curious, why are you replacing that valve?
An A/C tech will be better to do that job so that he will clean also the entire system and freon charging.
Hope that helps you out!

Jun 23, 2011 | 2000 Dodge Durango

2 Answers

Rear air is not cooling butfan works just no cold air


The rear air has a expansion valve,and it is bad,replace it to receive cold air in the rear,if this was helpful,please rate thank you

Jun 22, 2010 | 2003 Ford Excursion

1 Answer

Location of expansion valve on 2001 suburban. Blow warm rear.


The rear expansion valve is connected to the evaperator. I hope this helps.
Thank You,
Roy

Aug 09, 2009 | 1995 Chevrolet Suburban

2 Answers

97 suburban rear a/c doesnt get cold but front works great


the expansion valve is in the rear ac housing and it is bolted directly to the rear evaporator. it is an actual expansion valve and not an orifice tube. the part is about $45. the interior on the passenger side has to come out along with the entire rear ac sytem.

Jul 18, 2009 | 2004 Chevrolet Suburban

2 Answers

2002 Tahoe Rear A/C doesn't work.


the system could still be low on freon even though front works

Jun 21, 2009 | 2002 Chevrolet Tahoe

2 Answers

Rear ac on 94 surburban blows warm, front is cold. Is there only one orifice on the dual air system.


The rear air has an expansion valve in the rear of the cargo area right next to the rear evaporator. There is no orifice or filter between the condenser and the rear expansion valve so if there is any debris in the line it will clog the expansion valve. The orifice under the hood is only in the front circuit so if the front is cooling and the rear is not, most likely the expansion valve is clogged and needs to be replaced.

There is a factory service bulletin on how to r&r the expansion valve. It requires some cutting since they did not design it to be replaced. Part of the service bulletin is adding an inline filter at the outlet of the condenser before the front and rear flows divide. That will keep the rear from clogging up again.

I have a 94 Suburban and I had to do this in about 1998. With the filter I haven't had any problems since.

Jun 11, 2009 | 1999 GMC Suburban

1 Answer

Where is the brake load sensing valve on a Toyota Previa and where is it.?


brake load sensor valves are normally mounted on either the diff or the body above the rear axle
they are designed to open or close, depending on how much weight you are carrying, and let more or less oil to the back brakes

May 04, 2009 | 1992 Toyota Previa

1 Answer

96 toyota previa ac cycles on and off.


hi i took my 1992 to panama city central america. i have a overheathing problem whend i turn on my ac ,only send a e.mail to shancito60@hotmail.com to help out thanks

Dec 29, 2008 | 1992 Toyota Previa

Not finding what you are looking for?
1996 Toyota Previa Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...