Question about 2005 Nissan Quest
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
linkage on inside of door has come undone. take off inside door panel and you will find a small rod that goes to the lock mechanism where the door closes opposite the hinges. follow the handle to the door lock.the nylon bushing may have broken.they are cheap to purchase at auto part stores.
Posted on Apr 21, 2009
jimmy: it sounds like the drivers door unlock tamper switch or the other switch may have failed. One side can affect the other under certain circumstances. Your trunk lock also has a switch which arms and disarms the antitheft system. Try locking all the doors, make sure the hood and trunk lid are closed and then open the trunk. Leave it open open the drivers door and try to start the car.
If it's a no start. Disconnect the ground battery cable then put the ignition key in the run position in you ignition switch. Reconnect the battery and try to start the car. It should start. This usually will override the anti theft system. One issue with this will be, whether the antitheft system will remain disarmed.
Although I have never tried this before, I know that the system will not arm unless all the doors, trunk and the hood are closed.
I could suggest this to try if the car starts as I had told you pertaining to disconnecting the battery cable, I would take the switch and unbolt it from the passenger's side of the engine compartment just forward of the shock tower. Just let it sit somewhere so it doesn't get caught up in anything moving. If there is a light under the hood of your car, remove the bulb.
Let me know how you make out.
Posted on May 03, 2009
Lift up the handle, you will see the bolts there, You will also have to pry off inside door panel (after removing any screws) than you will have access to the nuts. That's all there is to it.
Posted on May 23, 2009
Either it has rusted up or the mechcanisim has been bent,take door panel off check it out if rusted use some wd40 work lock untill it moves.
Posted on Jun 19, 2009
Tips for a great answer:
Feb 07, 2016 | 2002 Chevrolet Venture Passanger
Dec 02, 2015 | Cars & Trucks
Jan 06, 2015 | 2001 Chrysler Voyager
Mar 25, 2014 | Dodge Stratus Cars & Trucks
Jul 29, 2012 | 2003 Chevrolet TrailBlazer
Jun 13, 2012 | 2006 Dodge Caravan
Nov 19, 2011 | 2003 Ford Windstar
Oct 07, 2009 | Ford Windstar Cars & Trucks
Sep 17, 2016 | 2005 Nissan Quest
423 people viewed this question
Usually answered in minutes!